selling a used ISKY cast aluminum SBC 671 blower idler bracket with isky idler pully stud & T-nut. I bought this for my dragster but never used it. it was repaired by the last owner, it was TIG welded and repair is stout and does not stop the function or use of this peice. the welds are still visible but can be cleaned up ( I had intended to di-grind the high spot s off and polish the welds smooth, then re-glass bead the area to put it back to a cast patina). this type of idler was used on SBC's with a stock style short water pump (street or race use) I dont run a water pump on my rail so I opted for a block mount idler set up. this has been hanging on my garage wall for more than a few years. these brackets come up every now and then and are really pricey and usually dont have the idler pulley stud & T-Nut! selling "AS IS" for $SOLD thanks, Paul