Register now to get rid of these ads!

Projects GowJob- the new 32 phaeton family cruiser build

Discussion in 'Traditional Hot Rods' started by jalopykid, Jul 12, 2015.

  1. Kustomkid
    Joined: Nov 21, 2010
    Posts: 531

    Kustomkid
    Member
    from Montana

    The hood looks good all one color.


    To chop,or not to chop. That is the question.
     
  2. PRIMER STUDIO
    Joined: Nov 13, 2006
    Posts: 1,240

    PRIMER STUDIO
    Member
    from Bozeman,MT

    [​IMG][​IMG]
    Not to much has progressed on the tub recently, but did get some shocks from the Elmer's


    Sent from my iPhone using The H.A.M.B. mobile app
     
    kidcampbell71 likes this.
  3. PRIMER STUDIO
    Joined: Nov 13, 2006
    Posts: 1,240

    PRIMER STUDIO
    Member
    from Bozeman,MT

    [​IMG]
    Been working on the spare frame some. I got rid of the mor drop axle and put a Dago under it so it matches the tub. Absolutely love the way a dago axle looks. Did up some different headlight stands using a 32 bar. The other ones I just couldn't decide if I like. I really like the way they turned out. Put on the old wires that I had on the old fordor


    Sent from my iPhone using The H.A.M.B. mobile app
     
    kiwijeff and kidcampbell71 like this.
  4. Looks great man! I'm glad to see you are keeping after it.
     
  5. 1-SHOT
    Joined: Sep 23, 2014
    Posts: 2,702

    1-SHOT
    Member
    from Denton

    Is that a flathead conversion for a Hemi?
     
  6. Great build thread where did you get the Elmers at?
     
    Stovebolt likes this.
  7. PRIMER STUDIO
    Joined: Nov 13, 2006
    Posts: 1,240

    PRIMER STUDIO
    Member
    from Bozeman,MT

    Thanks cactus1. Went through a rough patch with my daughters health and just about let it go. Thank god for the Elmer shocks! They brought me back to the light


    Sent from my iPhone using The H.A.M.B. mobile app
     
  8. PRIMER STUDIO
    Joined: Nov 13, 2006
    Posts: 1,240

    PRIMER STUDIO
    Member
    from Bozeman,MT

    Yup... it's actually a dodge hemi. Probably about the equivalent of an ardun but cheaper


    Sent from my iPhone using The H.A.M.B. mobile app
     
  9. PRIMER STUDIO
    Joined: Nov 13, 2006
    Posts: 1,240

    PRIMER STUDIO
    Member
    from Bozeman,MT

    Thanks Ron. I got them through the Elmer's directly.


    Sent from my iPhone using The H.A.M.B. mobile app
     
    Hot Rod Ron likes this.
  10. Gary Addcox
    Joined: Aug 28, 2009
    Posts: 2,530

    Gary Addcox
    ALLIANCE MEMBER

    Thanks for the info.
     
  11. Gary Addcox
    Joined: Aug 28, 2009
    Posts: 2,530

    Gary Addcox
    ALLIANCE MEMBER

    That baby Hemi solves all problems; you get "the look" without extra weight. Gonna be so neat.
     
    jalopykid likes this.
  12. krylon32
    Joined: Jan 29, 2006
    Posts: 9,472

    krylon32
    ALLIANCE MEMBER
    from Nebraska
    1. Central Nebraska H.A.M.B.

    Do you have contact for Elmer's? Your project is bitchin!
     
  13. PRIMER STUDIO
    Joined: Nov 13, 2006
    Posts: 1,240

    PRIMER STUDIO
    Member
    from Bozeman,MT

    A friend gave me a crash coarse on using an English wheel a while back, and I finally got to try it out on my own this weekend. [​IMG][​IMG][​IMG][​IMG]
    Really happy with how it turned out. Just need to weld it in


    Sent from my iPhone using The H.A.M.B. mobile app
     
    heavydumper and Runnin shine like this.
  14. 1-SHOT
    Joined: Sep 23, 2014
    Posts: 2,702

    1-SHOT
    Member
    from Denton

    Sick kids put everything else on hold. I hope she doing well.
     
  15. PRIMER STUDIO
    Joined: Nov 13, 2006
    Posts: 1,240

    PRIMER STUDIO
    Member
    from Bozeman,MT

    I wish I could say yes she is, but she is our personal little angel now. I was so down after she passed that I wanted to get rid of everything. Deep down I know she would have wanted to go for rides in the tub if she was able to, so just knowing that, I decided it should stay and that we should use it to make future memories.
     
  16. So sad about you're little girl. You seem to have the right attitude, I'm sure that is what she would want.

    Mick
     
    sonic03bluegt and jalopykid like this.
  17. 1-SHOT
    Joined: Sep 23, 2014
    Posts: 2,702

    1-SHOT
    Member
    from Denton

    I know how you feel. My daughter was diagnosed with a brain stem Glanoma when she was ten and passed a year later. It was 29 years on Sept. 22 and I think about her every day. You just take lt one day at a time. I had the same feelings that you did but I stopped working on mine, wife was a basket case for about 3 years. Have a son 2 years younger and had to stay strong for them. Stayed busy with work and finish your car.
     
    jalopykid likes this.
  18. jerseyboy
    Joined: Jul 17, 2006
    Posts: 634

    jerseyboy
    Member

    Been following this thread and enjoying your build. I am sorry for your lose.
     
    sonic03bluegt and jalopykid like this.
  19. Oh my, that's terrible news. I am so sorry for your loss! Don't be afraid to reach out if you need anything!
     
    jalopykid likes this.
  20. Pewsplace
    Joined: Feb 10, 2007
    Posts: 2,795

    Pewsplace
    Member

    I am so sorry for you with this sad news about your little girl. The passing of family is a real difficult situation to deal with. I know you will have good memories of her when the hurt lightens up! Take it one day at a time!
     
    jalopykid likes this.
  21. geoford41
    Joined: Jul 26, 2011
    Posts: 762

    geoford41
    Member
    from Delaware

    Losing a child is horrible and the loss inside never ends, believe me I know My son Scott passed Oct'13 and I think of him always, he & I had a love of cars. People & family will help you through, god holds them all now in his hands in a very special place, be strong. Prayers to you.
     
    jalopykid likes this.
  22. Fuck. I'm sorry to hear that. Sorry for your loss, I can't imagine anything worse.

    Hopefully you'll find some healing in building the phaeton.
     
    jalopykid likes this.
  23. 1-SHOT
    Joined: Sep 23, 2014
    Posts: 2,702

    1-SHOT
    Member
    from Denton

    We are all pulling for you. See my PM
     
    jalopykid likes this.
  24. john dioli
    Joined: Oct 12, 2012
    Posts: 83

    john dioli
    Member

    So sorry about your baby can't imagine what your going through just know she's in a better place watching over you, god speed
     
    jalopykid likes this.
  25. Stogy
    Joined: Feb 10, 2007
    Posts: 26,348

    Stogy
    ALLIANCE MEMBER

    Condolences to you and your family on your loss.
    Regards,
    Stogy
     
    jalopykid likes this.
  26. tommyflathead
    Joined: Apr 18, 2011
    Posts: 460

    tommyflathead
    Member

    My deep and sincere condolence to you and your family Brandon
     
    jalopykid likes this.
  27. PRIMER STUDIO
    Joined: Nov 13, 2006
    Posts: 1,240

    PRIMER STUDIO
    Member
    from Bozeman,MT

    Thank you everyone for your thoughts and prayers. It means a lot.
     
  28. Do you have any contact info for Elmer's?
     
  29. PRIMER STUDIO
    Joined: Nov 13, 2006
    Posts: 1,240

    PRIMER STUDIO
    Member
    from Bozeman,MT

    Mike Elmer said the best way to get ahold of him is at: [email protected] or shoot him a Facebook message on his elmer equipped page. Super nice to deal with, and the shocks are exceptional quality.
     
  30. Artiki
    Joined: Feb 17, 2004
    Posts: 2,013

    Artiki
    Member
    from Brum...

    So, so sorry for your loss. Beyond words.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.