1931 Model A Coupe sitting on a Kiwi Konnection built 32 Ford Chassis. Chassis is pinched to fit Model A. New 9" rear end with axles and ladder bars with buggy spring. Also comes with a complete 1961 ford 9" donor rearend for 3rd member "3.89" gears and brake assembly. New4" drop So-Cal I-beam front axle with new 37-48 ford spindles and steering arms. Ford F-100 hubs with new speedway bearing kit. Installed New Speedway split wishbone type radius rods New in box, Vega steering box with mount New Vintique 32 Ford grille shell and insert New 4 row copper radiator New Firestone 7.50r16 rears and 5.00r16 Firestone dirt tracker fronts, mounted on powder coated 16x4 1/2" Ford F1 pickup wheels. Ford 292 Y Block with 36,000 original miles. Edelbrock 3x2 intake with 3 Stromberg 97 carbs. Carbs will need rebuilt and linkages. Intake and carbs are just sitting on engine for mock up. Not Currently in running condition. Original Y-Block Ram horn exhaust manifolds. One manifold had a crack on the back side that has been repaired. Used Mustang T-5 transmission with Mummert adapter to passenger car Y-Block bell housing-will still need clutch, pressure plate, throw out bearing etc. Body Body has been chopped 3 3/4" and will need a few more areas welded up to complete chop. Comes with un chopped windshield frame and window garnish mldgs. Most of the stock body wood has been removed for chop and will still need cut down and re installed Needs top wood kit. Rear sub frame/floor has been swept to fit 32 chassis and rear floor pans built and installed. Deck lid is kinda rough could use a skin Asking $15,500 Car is Located in Vernal Utah and has a clear Utah title! Car is basically in the "mock up" stage. For more info call or text (435)828-5642 for fastest response. or email [email protected] .
The Jalopy Journal
