Register now to get rid of these ads!

Anyone know Rudolph Faltmeyer in SC?

Discussion in 'The Hokey Ass Message Board' started by IGOR, May 21, 2007.

  1. IGOR
    Joined: Jun 27, 2002
    Posts: 645

    IGOR
    Member

    Lost this guys number. Anyone here know him or have his number? He lives in Spartanburg, SC. Him and his son have a carb business.
     
  2. retroridesbyrich
    Joined: Dec 2, 2004
    Posts: 1,872

    retroridesbyrich
    Member
    from Central NC

    Rudolf Faltermeier
    150 Rock Bridge Rd
    Spartanburg, SC 29307
    864-463-6052
     
  3. Von Dago
    Joined: Feb 13, 2007
    Posts: 504

    Von Dago
    Member
    from New Jersey

    I have a business card of his with 864-463-6052
    It's spelled Rudolf Faltermeier.
    Hope the phone number is current.
     
  4. IGOR
    Joined: Jun 27, 2002
    Posts: 645

    IGOR
    Member

    Thanks fellas!
     

  5. lesabre59
    Joined: Nov 8, 2001
    Posts: 699

    lesabre59
    Member

    He did my two-two setup and literally rebuilt them and sent them back over a weekend, very nice work and I've been running my a couple years now. I'd recommend him to anyone.
     
  6. What does he specialize in? Holleys, Stroms, Webers? Full restorations or rebuilds?
     
  7. Shane T.
    Joined: Jun 21, 2005
    Posts: 908

    Shane T.
    Member

    He does strmbergs and his son does rochesters.
     
  8. lesabre59
    Joined: Nov 8, 2001
    Posts: 699

    lesabre59
    Member

    Mine were Holleys
     
  9. IGOR
    Joined: Jun 27, 2002
    Posts: 645

    IGOR
    Member

    He's got some really nice linkage setups and I believe he'll make an intake for ya too! Nice guys. They were set up at Charlotte last year. Very reasonable prices.
     
  10. Just make sure to tell him you want YOUR carbs back!:mad:

    Chopper had a small problem with his 3 deuces and now the three carbs he switched are junk!

    Dave had good luck but did tell him to use his carbs. HRP
     
  11. lesabre59
    Joined: Nov 8, 2001
    Posts: 699

    lesabre59
    Member



    I had the opposite experience, after receiving absolute junk from NW Speed, he sent me back all matching bases and bodies and even mde stainless hardlines and completed the job in less than 2 days. I have ZERO complaints with Rudolph
     
  12. bcowanwheels
    Joined: Feb 22, 2010
    Posts: 321

    bcowanwheels
    Member

    I have 2 94,s he did and the work is superb and very reasonable
     
  13. Bert Kollar
    Joined: Jan 10, 2007
    Posts: 1,234

    Bert Kollar
    Member

    I'm not sure Rudolf is still available. If you can't locate him Ross Engines in Youngstown does outstanding work. He had to rework one of Rudolf carbs for me. Ross used much better parts
     
  14. thequietwon
    Joined: Mar 21, 2006
    Posts: 600

    thequietwon
    Member

    I know you aren't looking for a recommendation but I thought I would chime in here...I bought a complete system for my deuce from Rudy and his son about 4 years ago at the Shades of the Past. 3x2 setup , 2g carbs. Looked great, ran like shit. Pulled the carbs apart and 2 carbs had check balls in the accelerator pump wells that weren't needed, and 2 carbs had mismatched jets in them. I bought from them based on a recommendation from a good friend but my experience wasn't the best.
    Sam
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.