Show your cool finned aluminum parts

This is the flatty going into the T-V8 I'm just beginning to build. It'll have some fins...


It's an 8BA with 59AB heads so I could use the Thicktun head covers. I scored the repop matching air cleaner recently on ePay. Think I'll need to swap the low PM-7 for a tall one, since the generator bumps the front carb but it needs to move toward the rear another 3/4" or so. Or is there a shorter generator I could use?

 

I was able to swap the low Thickstun for a tall one. Plenty of carb/generator clearance now. Mikey likes it!

 

I am laid up here in my recliner recovering from a knee replacement and I haven't been able to buy anything.

 

Some fins on my 32. I made the air cleaner.

 

Got this back in the 80's at a swap meet for $18. Was going to use it as an oil cooler on my Essex PU. JW

 

My Lucas coil holder on my RPU. JW

 

I have a few fine going on here

 

^^I remember seeing those valve covers advertised in R&T back in the sixties/seventies.

 

Original Edmunds early valve covers with matching finned tops for early Hemi

 

Those Hemi covers are the cats meow!! JW

 

early Weiand ('say WHY-AND') timing cover and blower manifold, but the M/T valve covers are mag.

 

Fuel Filter Housing

 

216 Chevy nicson. Never seen another one. Went to a good home. Should have hung on to it. But functional wall hangers don't do any good.

 

I just posted these cal custom part # 40-2700 they fit a Boss 302 or a 351
In the classifieds for a friend of mine

 

'65 FI unit, valve covers to go with, buttoned up with aluminum pan.

 

I seem to like GMC "white metal" . I also have a Skinner side cover and a finned pan to match the one with the breathers. Both were made by Bob Anderson. Any Y-Block looks good with T-Bird covers.

 

Wow that is a lot of AWESOMENESS there

 

Some stuff that just got back from the ceramic coaters today. Just sat it on the engine to see what it was gonna look like.

 

All 3 of them

 

This will be going on top of my 440, for my 1962 Chrysler 300 custom project

 

BUMP BACK UP

 

I want to play!

 

Turbo 400 oil pan.

 

I am going through withdrawal I haven't bought anything in a while

 

my 259 Stude. I've heard several stories on the valve covers but have no idea if its true. I was told that they were cast in a guys back yard and the mold was made from a modified offy cover, to say Studebaker instead of Offenhouser. Either way they look bithchen!