Hot Rods name this frame

need to know what this frame is. it has a built in spreader bar. a cable canister for the shocks. 3 running board brackets

 

Chevy. Maybe '29 'ish.

 

looks similar to a 36ish dodge coupe chassis I got with the same 36ish dodge coupe body, could be wrong but ya never know my chassis had the parallel leafs like that one seems to

 

I'm with gimpy- '29 or later Chevrolet chassis

 

Looks big enough to be Packard or in the Packard class. Is that shock made by Watson? Bob

 

I have a '29 Chevy chassis, it only has two running board brackets per side.

K6

Posted using the Full Custom H.A.M.B. App!

 

Good point.

 

http://www.jalopyjournal.com/forum/threads/want-photos-of-1931-1932-mopar-car-frames.827226/
looks like a 30-31 Plymouth frame to me. Scroll down and check out the sand blasted frame in the last pic...

 

^^^^^^
Count the running board braces.

 

there ia no name on the shock. it is about 7" in dia and has a 5/16 cable coming out of it

 

How about Bob.

 

i wonder if it could be truck?

 

I'd think maybe a large coach, the rear tin-valence and long (3) bracket distance.
Often truck frames had a deeper section to them.

 

Were is the rest of the car? Seams odd that a frame that nice is in a nice garage like that all alone. Bob

 

i put it in my storage shed to keep it out of the weather. the frame is nice with no pits. a guy was hauling it to the scrap yard so i bought it.. just do not know what is is. i thought it might go under my 29 chevy delivery but it will not fit. and 2 nice to cut up

 

1928 Henway

 

It might fit under a 29 body, and give you room for a buick straight eight

 

There is a 1941 Chevy 3/4 ton truck chassis I plan to save from a scrap yard too. The three running board brackets per side are rare and should help ID yours. Bob