winr's Recent Activity

winr liked willys36's post in the thread Technical Always Learning, Brakeing Efficiency Today..

I had similar problems with my Torino front disk/finned Buick aluminum rear drum brakes on my Willys for years. I have a '68 GTX dual...

winr liked Sharps40's post in the thread Technical Always Learning, Brakeing Efficiency Today..

Coming up on almost 2 years of driving with Ol Bessy (1937 Dodge D5 4-door Trunk Back Sedan)....had a couple panic stops here recently...

winr liked kevint's post in the thread Projects 1937 Coupe.

Big Thanks to Bills Auto Works for delivering my new to me 37!

winr liked John Tumolo's post in the thread 1931 Ford Model A Victoria.

1931 Ford Model A Steel Back Victoria. Nice complete original rare car from long storage. Bought it about 6 months ago but found another...

winr liked ro51_hemi's post in the thread two 15x10 back Magnesium Ford wheels with tires.

two back 15x10 magnesium wheels with whitewall tires wheels have a 4-inch backspacing taken off the back of a 1929 Ford Model A with...

winr liked Hotrod1959's post in the thread Vintage Shelby Slotted mag wheel rim 15 x 8.5 5 on 5.5 bolt pattern F100 Jeep.

SOLD [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]

winr liked Kerrynzl's post in the thread Technical Ford 9" Auburn cone type LSD advice.

I've had a bit of experience with them in Aussie 9-Bolt Borg Warner rear ends. Yes they do add a fine metal dust into the oil. But it is...

winr liked wandi harry's post in the thread Technical Stanchion repair / cast bronze?.

The windshield stanchion for my a model is broken at the pivot cup. I could actually just run with it as it is but l thought l may as...

winr liked gimpyshotrods's post in the thread Technical Ford 9" Auburn cone type LSD advice.

Put a decent sized rare-earth magnet in the bottom of the housing and drive-on.

winr liked Ebbsspeed's post in the thread Technical Ford 9" Auburn cone type LSD advice.

Yes it will. Here's an article with a lot of good photos and info on how to rebuild one, but as you can see the cone clutches are metal...

winr posted a new thread.

Technical Ford 9" Auburn cone type LSD advice

I have a Ford 9" 3.75 with an Auburn cone type LSD I have read on various sites, as they wear, they introduce fine metal dust into the...

Forum: The Hokey Ass Message Board

winr replied to the thread Event Coverage Anything hot rod or kustom related to do in Houston?.

Cruise in on fridays at Petco on Pearland Parkway in Pearland, Texas...