The Jalopy Journal
Just trying to figure why. I have another 392 with a TKO (6.71) and same bell housing no issues. I prefer to think things out. Thanks. and I have...
Thanks for all the suggestions. I was hoping to get the measurements to see what is going wrong before I modify anything. Its a very popular...
I'm hoping to find someone in the process of using Hot Heads Hemi to Chevy Manual adapter. The input shaft is bottoming out into the pilot...
I’ve got some guide headlights with a plug Im not familiar with. Anyone know if the female side is available anywhere? [ATTACH] [ATTACH]
I removed the gauge at their end of the fuel log and replaced it with a return line. It only happens sometimes when it’s hot.
I contacted P&J, they said the narrower perch centers should not change the length. It was my first question. my plan, so far, is to mockup and...
I have. But I’ll triple check. Thanks
Yeah, that's the next step. But 2" is a lot. So I'm hoping someone can confirm or point out something I screwed up. Thanks.
I'm in the process of my latest build. I'm using P&J split wishbone kit. Superbell Axle with 36.5' perch centers. Posie 2037-40L spring. I cut...
Never thought of that. Do they have needle seats for 5/16 line?
Fuel shoots out in all directions from those holes. Including straight up.
you cannot run the new strombergs with the top off. I’ve tried. The needle/seat was replaced by a ball valve. but I have also suspected vapor as...
Separate names with a comma.