The Jalopy Journal
A lot of what is creating the issue is the low pinion on the 9 inch. I would do as already said, raise the rear. I think I would also change to a...
A lot of builders put preload on the left front. I've had many old dragsters that the rolling chassis without motor would have the right front 2"...
My 68 Scout is - was a double dealer redo, They repainted it and retitled it one year newer.
Andy is correct & it was used on most all Chrysler 6 & V8s for many years. It's not really needed with modern seals used today so most discard it....
I think the pics above show the best way possable to get max strength out of the stock A frame. I have thought of running a length of 1 1/2 or 2'...
I have also seen the linkage reversed so it rotated the spool backwards. Another thing to check is the shutoff, if it's an older shutoff with the...
I use the round one that AutoZone sells, it comes in two pressure ratings, has a filter & a rubber wrapped mounting bracket. Around $40 if I...
I have 4 classic cars that I wanted to buy their classic insurance for, all in running and driving condition. After taking pics and processing the...
It's a must to have the flywheel balanced to match the 394's balance spec. It's usually done by welding on a weight.
For what is in the pic, I would gladly pay $400 but your in the wrong place - NJ !!
I have 7 in my shop now & have built hundreds. Most 350's with 010 casting numbers that were installed in 4 WD or 3/4 ton & up trucks were 4 bolt...
I run the electric from Autozone, cost like $45 It just installs in line, super quiet. I have one on my daily driver, 5 years & no issues. A cave...
Very nice pics. You have one nice rare block. Most that I've seen were CE stamped as over the counter, I wonder if these are stamped with Buick...
That's great, I never thought of lore as the same as fact. Thanks for explaining that as I've never heard it used in that way. I also would of...
I think of lore as like stories about Dragons. Is this the point you are at in believing that a 70's SJ 327 was made ? Perhaps I can show you one...
Separate names with a comma.