The Jalopy Journal
Harbor Freight Drill Press > Time and effort required to hodge podge together a drill press from a treadmill. Like Dale says, some things are...
There's no fucking way you can make a nice TIG weld with an electrode the size of a cordless drill in your hand...pass
Right, so if the pump is "pushing" wouldn't it be ideal to have it "push" the shortest distance possible? Considering, as someone else stated,...
I would move it closer to the engine. Your pump will have all the fuel pressure in the line from the volume of fuel in the tank but will have to...
I did a disc swap on my 9" because it was cheaper than replacing all the beat up drum brake shit. Does that make me a Street Rodder with a trailer...
So have you actually learned to weld yet? And ftr, here are my TIG welds: [IMG]
Buy a TIG welder
Dude under no circumstance should a suspension control arm be done in single shear, regardless of the thickness of the metal. There will be...
Probably 3/16 or .180ish
Typically, you can use normal filler material to weld to cast, although I don'tknowmuch about stick welding so I would use what the others...
Just triangulate the upper bars OFF the axle tubes with the center point forward like this: [IMG] It's fairly common and the geometry is quite...
Well it is a full-size so it would be impossible to build a true mini-truck. I understand what you are really asking. When I was much younger...
The bale spike sounds bitchin. I will look into that.
Because I don't want a rounded pipe end lol That would be the easy way out. I'm trying to be unique, even if it is tedious and time consuming.
Here's an example, with a round cap. I want a big ass spike instead: [IMG]
Separate names with a comma.