The Jalopy Journal
Dennis Carpenter or MACs will have all of the rubber you need. As stated earlier, 57/58 side glass is the same.
Good news! Just passed state inspection again (after some work), good for another 2 years. However, I now have new upper and lower ball joints...
It is a bit difficult to see in the photo, but you can see how I used the all thread to give me a way to offset the alternator while using the...
That explains why there isn't much selection. I used 7/16 since that was the size hole already in the generator bracket I modified.
After checking every hardware store in the area, I ended up using all thread again on the alternator mount. I'll continue the search and likely...
Crazy Steve, I think I used 7/16 when I first rigged it up. I noticed McMaster Carr had a 7/16 x 7" bolt in Grade 8. I'll either do something...
Still wrenching and driving. Car has been fairly reliable for me over the winter months. Had some issues on my way into work this morning, it...
My dad and I have been putting together a 29 Chevy Coach (2dr Sedan) for the last several years off and on. We are retaining the parrellel leaf...
Do you have any pictures? I'd like to look into this.
Those are the belts I used. I honestly can't remember the length I ended up with, but if I recall they were $25 before shipping.
Separate names with a comma.