The Jalopy Journal
We used a S10 rearend on our 31 roadster. With the wheel support ring and the spacers you will need , It ended up just right with 35 wires.
I put some STP in all of mine. You can tell the difference in how easy it steers.
I alway's put some STP in my vega box's. It makes a lot of difference.
I painted my roadster with it. First job and last with it. Spilled a little gas on it a couple of months later and it washed the paint right off....
I ran my 33 threewindow down the drag strip on my 84th birthday A couple of times.
I turned 84 last July . Just finished A 31 flathead roadster . Currently building A 57 427 big block chevy pickup, Out in the shop everyday. Been...
I have sealed beams behind my 36 lens. Been that way for thirty years, can see plenty good. No problem.
It depends on the angle of your shackles, If they hang at 45 degree you want need a sway bar, But if they hang stright down you will get side...
It;s the fan hooked through the ignition. Mine does that unless I turn the fan off first, then it dies instantly.
I drove my 51 merc back from the stray cat 500 at 70 to 75 miles an hour with the air on all the way. It's got a 350 350 with 273 gears. I got...
IF a top hose is longer than it needs to be then it's too long.
I narrowed a 57 ford housing to use mavrick axels. No problem, The bearing and seal fit fine . The marvick splines fit the nine inch center...
The rear spears on A fordoor are two peice. A upper piece and A lower piece below the door.
I have done all of my cars for the last thirty years. Do all my paint and bodywork work, frame and engine work also. I don't hire anything done...
I have shortened several of them. I just take a stock one and go back behind the hole to leave enough meat and drill a new hole. I taper it from...
Separate names with a comma.
The Jalopy Journal