The Jalopy Journal
Nice parts hunting, you learned well young Fritz boy.
I would use the Delphi 600 box. the original Ford box is iffy at best and why speed good money on top of iffy. T Fritz
One of four things when you have an idle-low speed over heat. Thermostat sticking, air pocket, water pump has poor circulation do to the impeller...
Well, most smaller items are done on a Bridgeport. I think on something that large a Styrofoam backer to hold the panel firmly mounted on some saw...
Thanks for taking us along on your trips Bob. It allows me to travel with out leaving the shop. Look forward to the rest of you adventure. I sure...
We use the ratio of one pint of kerosene to 2 gallons of gas for very low compression motors. Stuff from the 20.s and earlier, the were designed...
You could have a body mount rubber that has collapsed under the B-post. The latch/ striker could be worn out. Fritz
The plug is aluminum and will crumble if not careful and there is no replacement that i have found Fritz
3 1/2 HP briggs or a Chinese copy
Your changes will work quit well. T Fritz
A 1949-53 Buick 263 straight 8. Insert bearings on the crank and rods. Light weight( for its day) casting of the block. Same size as the earlier...
Very good people. http://www.riwire.com/ T Fritz
Wow! Clean for a Minnesota car. Tail light lenses too.;)
I have overhauled them in the past. i install bronze oilite bushings in the centers and new pins. Rebuilding door hinges is 20% of my business. I...
Ford/Mercury bent the door hinges to adjust them. to raise the top of the door they would place a block of wood in the area of the lower door...
Separate names with a comma.