The Jalopy Journal
Driving it off the original cam will spin it backwards
I can't remember which, but it is possible to fit an Anglia or prefect distributor to an a engine, might be a bit more readily available in the...
We got the burtz fully dissembled and we discovered the culprit, when we built the engine we used a cast crank gear amd that failed taking out the...
Yes the block did have the oil hole, not sure if it's a billet or cast gear
Between yass and Gundagai
Stipe pump and relief, engine had consistent 40psi, oil pressure was still at 40psi when the engine coughed but after that had zero, turning the...
That would be interesting to see but packaging exhaust on a right hand drive model a is difficult, will update after more disassembly [ATTACH]
Pic of the gear, wouldn't attach to the previous post [ATTACH]
Our trip to Gulgong for the model a 95th birthday was a blast we travelled 537miles at 70 mph most of the way but in my mums burtz powered model a...
7.00x16 5.00x16 Stahl sport radials
Today was a success ended jetting both carbs up to stock jets and made it much happier, adjusted brakes (repro Lincoln brakes), cleaned the plugs,...
It sits way better than it did 2 years ago[ATTACH]
Mums burtz powered sport coupe went for its first test drive with dad @phill today, it went fairly well but still needs a bit of tuning, the...
I spent the last couple of weeks working with my dad to try and finish mums burtz powered sport coupe ready for the queenscliff rod run (a pretty...
Had my town sedan out for 10 days over my Christmas break, I've recently changed from a Stromberg 97 to a late larger 94 from a 272 yblock, I'm...
Separate names with a comma.
The Jalopy Journal