The Jalopy Journal
Sounds like your mind is made up. What I was told by a friend in the MVD, some night you maybe screwing around and get pulled over. An astute...
I would suggest taking the blower apart and checking it out. They are fairly simple and replacement bearings are available, but you can screw it...
There's a lot of factors you need to consider. maybe I missed it, what car is this going into? Are you using the 8ba you purchased? Are you going...
Guilty, I installed a 12volt piezo buzzer on my 6 volt system works fine. Actually to loud, had to but a piece of tape over it. Here's one on...
Worm gears clamps IMO clamp down the tightest. The OP wanted period correct, if you have proper size hoses towers should work fine. I have owned...
Speaking in terms of Corvettes of that era. Upper and lower rad hoses were secured with tower clamps. If you want to get crazy, Wittek tower...
Don't be a hater.[ATTACH]
For your consideration. Here's some info from The late "Rumbleseat", aka Paul Garrigan. He ran a 9" clutch with heavier pressure plate springs in...
I converted to Pertronix with the two piece cap. I did need to drill the openings for the 8mm radio suppression wires. Here's from the barn on...
Nicely done!
Friday had a good turn out, I enjoyed it. Reacquainted with some old friends. Looks like the rain held off for Saturday for the events. Thanks...
I grew up in Windham and was just there for the 4th of July. The Hamilton Motel was just renovated, not sure if it's open yet. There's also...
The Towns of Windham and Greenville are only 15 minutes away, do a search for resorts.
The Glens Falls House is across the street.
I'm not that far and will drive. You can stay right there at Riedlbauer's resort.
Separate names with a comma.