The Jalopy Journal
I have helped many with this same problem and had great results with laying the panel up on the steel top bench and first coin the ends with a...
28dryer contact me at 507-263-7411 Dan
Paul contact me at [email protected]. Dan
There is no reason to even think of a 90 ton off shore overpriced unit when you can get an American made one for around 6500. That will lose only...
I have to ask if you have ever used one for any project ? They are not designed to replace a plasma or H press but to complement them . No tool is...
I have to go to south Florida and will be able to haul on an open trailer anything you need between here and there . Don't know how much room on...
Why would you advise someone to shrink an area that is obvious by the picture to not have enough metal already is beyond my thinking . Here is a...
First off your cut patern is not correct and is not giving you enough sheet metal for your radius . Second issue is that you need to shape the...
I have been trying to make contact with Ben and I get no response . Does anyone know or have been in contact with him .Please PM with any info .
That is a Yoder 90 on one side and a P-2 pettingell on the other . The yoder is a 120lb hammer and the P-2 is a 90lb one . Cant wait to see...
[IMG] [IMG] [IMG] [IMG] [IMG]Don't forget your ear plugs for the Spring Event in Dennison[IMG]
[IMG] [IMG] [IMG] [IMG] [IMG] [IMG]Getting closer with more paint and motor plate finished for the Petingell . Hard to work on your own stuff...
Bttt
Separate names with a comma.
The Jalopy Journal