The Jalopy Journal
More mostly flat/angular stuff I like pizza boxes, perfect thickness.. ram board would work great too, and less greasy, never thought of that....
I have an early sbc intake that I retrofitted a pcv. Created a simple sheet metal baffle below the pcv and it draws no oil. Easy enough to fab...
Here are 80s Chevy van in my t. Friend has same in his a
Btw - The problem in my t was a wimpy 3/4 inch rod with heims. My buddy has a similar issue on his A and it was due to a small kink in his tie...
I had that as well with the spring behind in my t. Check your tie rod. Is it properly sized? Should be at least 7/8 diameter. Also note if you...
80's Chevy van front seats are awesome. Plus they are plain with no pleating or ribs. Recover real nice and look traditional. The slider...
Look into 1980's jeep radiators. I originally had mine mockup up with one. It's a little shorter than a mustang (I eventually ended up going...
Pretty cool man. I have a 33 pickup as well. Parts are scarce. Riley productions makes a few hard to fab items like lower cowl patches. Good...
Sorry for not clarifying but 57 chevy.. i searched the Danchuk site but can't find anything but the pig tails.. Got a part number? [IMG]...
recently took on a 57 sports sedan i'm turning into a mild custom.. started putting her ass end together and after bolting in the new tailight...
64-66 fit perfect ... i run one in my T... Get at least a 3 core... i'd even recommend a 4... they're cheap and available on egay or your...
i'm comming... jersey and PA folks taking rt78 be careful.. it's a mess... yesterday i hit a 2" drop at 50mph and almost lost it in my truck......
Signed title is usually proof of surrender isn't it? I just transfered my wifes late model mustang with nothing but a signed title. I doubt...
My buddy just finished a his model A truck. Went to a couple of NJ dmv's with an old ny registration and they keep turning him down for title...
Separate names with a comma.
The Jalopy Journal