The Jalopy Journal
seems to me that 4200 psi in itself is enough to warp large panels???
another vote for the ozone machine, my pal's 64 impala seats were green with mold and 8 hours with machine inside solved the problem.
Looks to me like a skim coat of Bondo failing, seems to thick for paint. Ralphie
Boat!!!
BINGO
Looks like to much tongue weight to me. But what do I know!!! Ralphie
You lucky sombitch, Beauuuuutiful .
Maybe the spindle is blocking my view of two adjuster slots your starwheel isn't behind the one slot I can see and it would be tough adjusting the...
I don't believe a 30 gallon tank and 5 HP can provide the volume needed to use a HVLP gun successfully, maybe the first few seconds of spray time...
Are you setting the crank in the proper position before setting the lifters on the right cylinders, then rotating the crank 180 degrees to set the...
Trade the 350 for a 200 4R, should fit in the same hole, trans mount may have to be moved. Some one who has done it will chime in soon I believe....
Bank deposit bag stuffed with money, another tine a hand bag. I'm as honest as the day is long returned all. 1/2 " air ratchet that I kept....
Bondo!! And maybe metal welded to fender lip first. It's a custom after all, buckets of bondo is ok .
Check out my avatar, Etch primer and paint after sanding with 220. Zero problems, and it looked exactly like yours when I started.
Assembly manual available from Ecklers Classic chevy parts in FL. If your rebuilding a Tri5 you gotta have this manual.
Separate names with a comma.
The Jalopy Journal
PostPost
