The Jalopy Journal
it's getting hard to come by, but cam2 break in oil is great stuff. amsoil also has a great break in oil that is pretty easy to find. good stuff...
that used to be the case, but the popularity of them caused other rebuilders to start using the term generically to mean a basic rebuilt engine....
having seen the inside of several crate engines (i only consider new gm engines to truly be crate engines) from both gm and other sources, you are...
as the owner of a quality performance/race engine shop, the only thing I'll say is i would be charging about 25-2700 for a pretty well stock...
i have a dillon rad in my hot rod, i used the 32 lowboy model and it keeps a pretty warmed over tunnel rammed 350 as cool as i want it to be. the...
for me it depends, I've done it both ways. nowadays, since i own an engine machine shop, i just sort of gather up good stuff and put something...
the mallory unit says no ballast resistor if using theirs or other high performance coil. i used an msd blaster 2 with mine and no ballast. got...
the high torque mini starter should help. being small it also gives more clearance from the exhaust. i use one on a hot rod with 13:1 compression...
that pic looks familiar :) still thrashing but im planning on having mine ready. my parents just picked up a 64 impala ss yesterday, so they're...
I just installed the mallory piece on a sbc and used a new blaster 2 coil with it. Ran straight voltage to it and worked fine. Mallory says to use...
the biggest problem with them in stock form is the heads. a set of good flowing, 305 heads, a mild cam (very mild, its a small motor), and they...
yes it can be removed and replaced with a standard style oil filter adapter, remote filter housing, etc. i believe there are two Allen head plugs...
Separate names with a comma.