The Jalopy Journal
I should have said the best part is it was all stuff I had in the garage. An old masking paper machine that my last job was throwing away. Some...
I spent a couple of hours today building this door dolly attachment for one of my jacks. I'm going to add another hole about half way down the...
Yessir. My brothers 52 aligned just fine. Sent from my SM-G900T using Tapatalk
Changing the springs won't correct the geometry either, it needs an alignment. Springs and, if needed uprights, are just for height. Sent from...
Change the springs out. If you have to, the 49-52 uprights will raise you 3/4 of an inch. I left the bump stops off with no problems. Sent from...
Vinyl is a pain unless you get the right vinyl. The sign shop should be able to point you to the stuff that is low tack, it's usually the cheap...
I'm doing a set now, but I have a better way. I'll post it up when I'm done. Posted using the Full Custom H.A.M.B. App!
Posted using the Full Custom H.A.M.B. App!
Most of us painters use the same method......lay down a lot of tape over a flaked or pearlescent panel, peal off some tape and spray, then...
I've got one designed that i have yet to build, but it is an interchangeable between e-wheel and power hammer. I designed it to save space but...
I know that feeling....except I'm 40 with a 2 year old and another due in February! Luckily my wife understands my addiction to my garage and has...
You sir have exceeded the home made part of this thread! Very nice indeed! Posted using the Full Custom H.A.M.B. App!
A demo piece for something I'm doing for my wife for putting up with my onry ass..3003 aluminum, planishing hammer, bead roller, hammer and dolly,...
If I could give more thumbs up I would! I bet it looks insane in person Posted using the Full Custom H.A.M.B. App!
Good work man! Posted using the Full Custom H.A.M.B. App!
Separate names with a comma.