The Jalopy Journal
For 25 years my winter driver was a '40 Ford P-U. It is off the road this year for a complete rebuild and repair. I have fixed the rust in all 4...
The original question is about alignment. I do not know of an adjustment to fit the pinion to the ring gear. Any starter system is easily...
Same problem years ago, it took a while to find but the bolt that retained the hose on the caliper was too long on the banjo fitting. The bolt...
contact "victorsam". He lives in Cheyenne and has a thread on building a Chevy 5700 COE
I get these hammer marks also, I feel they come from my contacting the metal with the edge of the hammer, not hitting the flat face of the hammer....
I was not referring to the build posted, the description struck me as funny and sometimes very true
That sounds like a definition for a Rat Rod. I will have to use that one next time I see an unsafe rat rod build.
The passenger side fender always takes the worst beating but this one is still much better than the one I used on the back of the International....
On that small of a dent you can tap from the back side with the dolly or the hammer to raise it up even or just about even with the main surface....
I use my granny low 4 speed while pulling a trailer. It is also fun for making lots of noise at runs, 2000 rpm sounds great but you are still at...
Keep us up to date. I will let Rhodel (the owner from 1961 on) know how you are doing on the project. Rhodell's son told me the bed hoist is a...
[ATTACH] I stretched my International in the cowl 4", the doors 4" and behind the doors 16". The object was to keep away from the obvious stretch...
Going from memory, on a hardtop there are screws that can be accessed after the side glass is removed same as the doors. I do not recall spring...
Separate names with a comma.