The Jalopy Journal
When we built our P/S 59 Biscayne 283/185 4 speed back in 66 I accidently built a couple of an inch engine setback by putting the engine in it on...
Good to hear the car is still around, too bad there's no class for it now. Bob Dwyer did the engines and usually drove the car when we used to...
If you've ever broken an axle and wondered how to get the stub out of the center section try this. Put a piece of heater hose in the axle tube...
Good ideas on rolling up cords but what works in the winter when they wont roll up right ?
In the mid to late 70s at a Bradenton points meet we had a 69 CJ Torino with a bad C6 transmission and Marty Snowballs 69 CJ 4 speed Mustang with...
For sure, old post but I had a 59 Biscayne 283/185 4 speed that ran on Atlas Bucrons and went 15.54 on a 15.24 record back in 1967
The 200 or 250 6 is the same basic size, still not enough motor for a shoebox in my opinion
Rusty, yes it is a Desoto, I was there
Open your tool boxes and take pictures of all of your tools, the boxes and all the stuff hanging on the walls & ceilings. I learned that the hard...
As a dealership mechanic in the 70s the best stuff I ever saw was an additive called Krex. If this stuff don't fix the nothing will [IMG]
We ran a 67 Fairlane station wagon in S/E in the early 70s until I rolled it. We then built a coupe for SS/E, no more 7 inch tires for me ! Both...
Are the plans to run In 2020 still going on ?
What kind of power could a built street naturally aspirated one make ?
Saw him at Bonneville years back when his son was making a backup run for a record with either a liner or a lakester, can't remember. The car...
Avoid the early Grenada transmissions that used bushings instead of roller bearings. The truck OD are trouble free as long as you avoid any power...
Separate names with a comma.