The Jalopy Journal
Not many 5 1/2 bolt pattern wheels to be found. Center hole will probably be a problem.
I've done many Mustang II front susp. After 6 mo. to a year the 4 cyl ordg, springs sag and lose some of there travel height. I replace them with...
I'm doing a 40 Standard Coupe as well , I'll be glad if turns out as well as yours.
Diode is the answer. Had a bad parking light socket that caused feedback to steering colmn, Diode ended the problem
Newer vented cap should work. I drilled my inlet pipe added a fitting and vent hose ..Now a days parts are better designed.. Cap might be all you...
Early on on my first builf A 33 Ford pickup SBF and 4 speed. Worked great around town , The a group of us ( back in 1974 ) desided to goto...
Since Your taking advise as to getting a better gun . You will be years ahead of your game by moving on to a new gun.
After missing your progress for years while playing with Agent Orange, I see that at least your still going forward, at least it looks that way if...
Your air adjustment screw is too far threaded into the fixture. un screw it until air stops. A little air when lever is pulled, alot and paint...
My first build was also a pickup with the same problems, Not much has changed in 46 years. New England was just as hard, as to rust.
I'll try for pics this weekend..
I all ways run SBF in all early Fords, and I all-ways have them sit low so I do not need to screw up a flat floor. I have thousands of street...
Great build pics. I knew I was not the only one with car parts stashed in the bed room.. I'm ready to see the body mounted..
Separate names with a comma.
The Jalopy Journal