The Jalopy Journal
http://www.thunderhill.com/ Willows Northern Calif.
I would just time it by ear. Or use the old vacuum gauge. I would recommend a conversion to LPG. LPG is not fussy and that makes life easier. If...
Take a look at the ring gear. One side should have relief cuts for the starter drive gear.
Forty amps is quite a load. DC power needs large conductors and good mechanical connections. Be careful.
I like this video for an explanation of how adjustments change the pattern. [MEDIA]
Is your coil wired backwards? I heard somewhere they will work, but very weakly when backwards. Try a different coil, I have seen them fail and...
It sounds pretty normal to me. The through out bearing will start making noise as soon as pressure us put on it, I don't think that is the case...
I have seen some over-center springs that act like an assist to lighten the pedal force required. They use a large spring about the size of a hood...
Back in the day the local parts store was like a mine field. Oily rags hanging out of back pockets were set on fire. The cigar box on the counter...
I am always amazed at the number of fine cars at a small town car show. Over 700 entries this year.
This dust separator looks like it is more sawdust oriented but it might help....
The HF saw only lasted a few minutes. I moved up to Chicago Pneumatic and it is still going strong. I tear the blades up pretty fast, so I just...
Mine seem to get jealous. Work on one, and the others start acting up to get some attention.
My 63's lack of floorboards inspired Rustero.
I would take a close look at the pulleys. Make sure there is no step worn into the pulley. The belt needs to get pinched and not bottom out on a...
Separate names with a comma.