The Jalopy Journal
I just moved to the Atlanta area and interested I just moved to the Atlanta area, and interested in the contact info. When I moved my toolbox...
You will have to make sure you put in a ballets resistor in to the points or you'll burn them up. Found the hard way after changing them 3 times...
Could it be the dust shield rubbing? Posted using the Full Custom H.A.M.
What about I trade you a couple space heaters and a tricycle missing a front wheel for it. Haha Posted from the TJJ App for iPhone & iPad
For one if you use pipe instead of tubing your welds will be pourus due to the high carbon content in the pipe and the welds will fail because of...
Just my 2 cents but look how moderan cars are designed today with electric fans they may not have shrouds per say but they do have lower covers...
I usually eat at the Y for some fur burger and fries
I wouldn't soda blast it I ran into that problem once before that stuff is so fine it's hard to get out of the metal when done. Your best bet is...
You've got a couple Mexicans across the street that pretty handy with a spray can. That's cheap they might even cook ya up tamale or two.
After reading all the posts you guys forgot to tell this kat that he has to check for a resistor wire to the points or install a ballast resistor...
I have to say the mad max car it's the only one I've seen with a super charger that you can on and off with a flick of a switch.
After reading all the posts, it's just like the aged old battle between car makes. For years I was a big Holley fan still am, but a few months ago...
Separate names with a comma.