The Jalopy Journal
I imagine I’d hear that in the water pump/manifold. It’s got the Avanti pump. Sent from my iPhone using H.A.M.B.
It has been years since I assembled the motor, but I did have intentions of running a mechanical pump so that is a possibility. Guess I could pull...
Electric pump. So count that out Sent from my iPhone using H.A.M.B.
I’m really dreading tearing all apart, but I need to eventually. Hopefully it’s something simple like that. Cool intake btw! I’ve never seen...
[ATTACH] It’s still “knocking”, but I’m still driving it. The noise sounds to be coming from the top of the timing cover. I’ve inspected the oil...
[ATTACH] a friend of mine shared this on fb. Believe it was a friend of his in the 90’s. Sent from my iPhone using H.A.M.B.
I wondered about the valve too. I inspected it, looked fine. But are there specs somewhere, how do I know I have the correct parts...
I’d be happy with 10lb per 1k but it doesn’t get much over 20psi ever. Yeah I still have the books somewhere around her. Sent from my iPhone...
I had 20 psi at 2500...however I inspect things as thoroughly as I know how before I get carried away. Sent from my iPhone using H.A.M.B.
Well I started off to the dmv yesterday to register and started hearing some knocking. I’ve had low oil pressure once warm from the get go. I got...
So it turns out that the butterflies were just stuck in the chamber. There’s an adjustment screw that I would assume is an idle adjustment, but I...
Ok, you can stop now Sent from my iPhone using H.A.M.B.
I suspect something like that happened although I am running a bypass valve and (assume) my iac values are in that range. But I recall a slight...
No, all of that is moving free. Sent from my iPhone using H.A.M.B.
Not that I recall Sent from my iPhone using H.A.M.B.
Separate names with a comma.