The Jalopy Journal
Ya. Its not real old. Its rustolium, so im guessing it should come of with lacquer thinner. I just wasn't sure if all that would be necessary.
Ok. Ill try the lacquer thinner and a little scuff and go from there. Thanks alot!!!
So im putting together some junk, and i had to put in a few patch panels. I ground the welds down and sprayed some rattle can paint over it all to...
Its still all doable. You just have to be resourceful and crafty. You gotta keep an eye out for good deals and friends who know friends. Cant...
Well, here's what I did. I cut the arms off of both leaversand ground the remains round. Then i installed them as spacers. Then the final chunk...
I thought that if i dont weld or lock it in to the neutral position that the column "cover " would rotate loosely?
I might try cutting the arms off grinding them smooth then tack welding to keep the column from rotating. Would that be the best? As long as its...
Hey guys. So i have the column out of my 57 chevy with 3 on the tree completely disassembled, and i want to eliminate the shift levers and also,...
[ATTACH]
Well the bracing is done. And the floor is gone and the rockers are, well... pretty much non exsistant. But the old sill plates are kinda screwed...
Hey guys. So I've been bangin away an a rotten ol 57 chevy gasser project, and have been trying to avoid the elephant in the room. So the floor...
Yes. My NEW edelbrock intake doesn't have the hole for the old road draft tube. It has a hole infront of the distributor. Edelbrock said to run a...
Separate names with a comma.