The Jalopy Journal
Short of a leak down test. It sounds like when the engine is cold the cylinder is sealed off. But when warm and things expand, it sounds like an...
It would be wise to change the ball and fork as new units. Use anti-seize in the ball/socket of the fork assy. As repeated, you find the throwout...
What is the make and year of this car? This is so mean looking.[IMG]
rds... Talk about falling in love. I'm walking in the oil drenched quench as I dip my off set water jacket to the other side, (more in the...
Here is where, I Drag, is chasing tune. I think he went out of the tuning window in degrees. This quantifies I Drag's tuning and could tell the...
I would like to offer bottom line basics so you know why you are making adjustments. I may scatter brain and not stay in a set pattern. Tuning and...
The Ackerman url got me thinking. I know I can take a tape measure and line up the tire centers to the straight to the steering wheel. Say I drop...
The car needs a solution of arm&hammer baking soda mixed in a bucket and poured over everything. Then take the box(s) and powder the car snow....
Had to look up the parts.. OK, so how is the "ignitor"? Do you have the dist if you are using the new "ignitor"? Name what parts are mixed and...
The Rice has it right. Way custom. Looks good if you never saw a stock 40. Still looks custom and right... Especially the rear with the fender...
I would find the ants on the floor, sugar bowl, someone's picnic in a park, and stack them under the rotor so the rotor is closer to send the...
I would like to kind of, "soil sample" the suicide theories, or add to them. I do see the front bar take to the sanding disc (street) a little too...
What a kick ass thread this turned out to be. How can I be in two camps at the same time!! I am on Neo's side 100% and then here I pull stakes and...
First photo of Bluto's is when they fired the 40's design team, the 50's team came in after the war, didn't know what to do; took a 40, cut the...
Stang, the engine starts too quick to have a leak. Even at that lean condition it sucking out fuel, is my guess the carb to manifold is cleared...
Separate names with a comma.
The Jalopy Journal