The Jalopy Journal
I personally would never ever do that! God forbid she ever found out....Found out I am capable of saving that is. I just buy it and eventually she...
The heads I have are 6272990 and they do need the special intake gaskets due to two openings, one on each side of the middle water jacket port....
Ok so the 350 is out but what do you guys think on the gears and carb questions?
For steel just grind it out down to where you have about 1/8" left and just use 7018 p-5 (6010) is a brittle rod and not good for anything that...
Ok all you eggspurts, I have some questions as far as what trans to use in my proj. but first I want everyone to understand what I'm trying to...
I think you are right. Dean
Does the (40)5445 sound right? If not can you give me some idea what it should be+/- I'm pretty sure its an 85 out of a 3/4 ton Suburban. Dean.
Not sure exactly where to look but here is what I came up with, On the block it clearly sats 7.4LG HI Perf., K2 PA 88 / (40)5445. the first is...
Got er home and sunday pulled it apart, Found a four bolt main and rect. port heads that say Hi Perf. under the valve covers. Still haven't...
Thanks for all the good input. I'm getting this engine and a rebuilt turbo 400 for free so I'm not going to be too picky. I'll check all the #'s...
Thanks Frank, So they were added later. I'm confused on this site, I post this and then can't find it??? Are Truck engines different? Dean.
I have a similar post in the wrong spot here on the H.A.M.B. Sorry just learning my way around. I'm building a 52 Studebaker Commander 2 door...
Separate names with a comma.
The Jalopy Journal