The Jalopy Journal
Based on the picture you show of the drum mounted on the five studs, I believe I know the problem. Those studs are too small for the holes in the...
Second day down here in Texas, too.......headquarters for Atomic Industries! DD
Yup, it DOES work! As above.......absolutely NO lube on axle, or inside hub........CLEAN and dry! Tighten nut to spec. The tightness of the nut...
Correct......the Jeep tailshaft housing is only 6" long. That is right at ~ 10" shorter than a 2-WD S-10 transmission, and that's about as short...
I know this is an ancient thread, but I have reason to be playing with these Jeep T5s at the moment, and I have some info to add that will...
Many DC motors WILL run backwards by reversing polarity...like window motors and seat motors. Your Starter Motor is a series wound...
Any good news about Dick from anyone? DD
Tried to watch it last night and it turned-out to be some good lookin' gal driving a city bus like a mad woman. DD
My God, good heads (in better overall condition) are almost a dime-a-dozen. You've already done the hardest part in removing the boogered head. DD
A pic that I came across some time back. DD
[IMG] What ya got against square airplanes? DD
The Ford "stamp" is not an "atta-boy" from Ford as to design and quality. It's an expensive licensing agreement permitting the reference to, and...
That sure doesn't look like any "1935 Henry Ford Steel 3 window" to me. Looks like a Chevy body. DD
Quite representative of the way GM did frames, at least back in the '50s and '60s. Corvettes had a similar type of stenciled application on their...
[ATTACH] If it was still sittin' in Dean's garage all these years, Dean would have it in the front yard washin' it and it would look more like...
Separate names with a comma.