The Jalopy Journal
Leave the center piece in and new gaskets come with patterns for a good fit, no center strip looks like billet rod stuff
The Maverick in the one to use, the Granada is wider...
Bumpers interchange, because I have done it, Merc front grille guard is same as Ford with Mercury cap on it.,,,bumper bolts are all the same...
I'll be there with an another 40 lover from Fla. on thurs to sunday . look for black 40 coupe with Fla. 40 plates and say hello. To the guys in...
did pin shear? looks like gear is to far up shaft, may have walked up and disingaged from cam, sorry about bad luck, flat cam takes factory steel...
dash and cowl are 3wd only , unique to that body style.
will arrive friday and looking forward to see the 40 flatbed from Springfield
TOMMYD I'am using tri y 's on a 302 with AOD and they take clearance work on pass side because the AOD is the big bell housing , you can grind...
Love the truck, like the colors , keep it locked in time
check float levels while top is off and besure you don't have to much fuel pressure,,,the owners manual is very good at providing tuning...
you said Green wire tach, does this mean negative on coil ? because is where it should hook up
just for information on 40 dashes, the 3wd is wider and doesn't need to be cut in width and all the others, sedans, cabs, 5wds need 1 3/4 cut ,...
love your gussets, any trick ideas for the front?
do a search on here for the S-10 tail housing on Ford T-5 , sometime ago there was a tech on this exchange...
check this out, I hope I got the link correct , if not just search the streetrodder.net http://streetrodder.net/?cat=8&paged=9
Separate names with a comma.
The Jalopy Journal