The Jalopy Journal
Thats a 72 C10
http://www.vibratesoftware.com/html_help/html/Diagnosis/Propshaft/Propshaft_Angles.htm This explains it all. And what to do when it out of spec.
there isn't much to know. A few safety thing like never put a flamible liquid in it regardless who tells you to . for one it atomizes kero and...
You have to pull the motor, the engine mounts are on the crossmember and the member you now have to mount the engine most likely will be in the...
It’s very possible that the shipping lines are in New York. The shipping lines need title in their possession and it attachéd to the...
In the situation of road racing where you change parts faster than socks it makes little difference on wear, they want grip and are trying to...
You might think that if you had all you documentation with dated stamps and all the history of the design and the patent you would be safe. For...
copyrights cover ideas or words assembled as a book but not as indvidual words it would cover the image in a photo but not the subject of the...
50's GM maunal brake. try www.kanters.com
One of two things causes this to happen. Using solid wire without gas and/or having a magnet to close to the weld, Or just behind it. It disrupts...
All bags have a range they are supposed to operate in. It is suggested by the MFG. You should go to the MFG site and ask or see if they have it in...
To the best of my knowledge the 6 cyl. bell in 55 was different than the v8 bell. You need a V8 trans for this swap. I don't think the splade...
Merely pointing the gap into the cylinder does not get you anywhere other than killing a few hours of the day. Indexing is done on a dyno so you...
moisture on the air line will cause this.
When magnesium catches on fire it is very difficult to extinguish and burns extremely hot. It can't be put out with water. It has to be starved of...
Separate names with a comma.