The Jalopy Journal
Hasn't logged on since 2021, but not "BANNED".
Heck, we've got HAMB members selling parts that were copied directly from parts made by other HAMB members.
So you're wanting to hem the edge? [IMG] You won't want to use a brake. Think of it as a door skin. Tip it to start the flange,...
Why? I’d just leave it as is; increasing just the diameter of the tank pickup isn’t going to be of any benefit.
Halibrands will often have tag(s) cast into them indicating the size, model number, and other such identifying information. Here's an example:...
Face value it looks like a scam. Every single photo has a different sort of background in it. People with tons of neat stuff typically don't sell...
The B cars with the SBC have 700R4. The ones with an Old 307 have a 200-4R. I would assume the D cars followed suit since they're essentially...
He has in another thread. https://www.jalopyjournal.com/forum/threads/lincoln-brakes-on-a-model-a.1313542/
The rear backing plates are the same across all the years of Lincolns; the depth of the fronts are what varied. Previous posts have seemed to...
Are you trying to build a 1970s styled car or something from another era? The '35 style wires are not 8" wide. Are you planning on cutting them...
The Boling Bros (formerly MT) cast drums mount to the outside of the hub, like the '40 Ford, which is why they require the "'40 Ford style" hubs...
You are measuring from the rear surface of the drum, which does not affect track width. The only measurement that matters is location of the drum...
The measurement is the same between Lincoln and 40 brakes. They use the same hub. If you're using cast drums you may "lose" another 1/16" due to...
That's just some home made or hardware store hinge. I wouldn't worry about its position as you'll need to replace it. TBH, without seeing a...
@‘28 RPUSend your stock axle out to be dropped by someone such as Okie Joe or "He that shall not be named on this forum". That will narrow up the...
Separate names with a comma.