The Jalopy Journal
I added 2 carb images to my album.
oh another thing...i am using the cheap duraspark 2 ignition setup but had one fail on me. I got a new one because of the warranty. I also have a...
it runs great now that i got the idle fixed so i will put the 3.5 PV back in the secondary and reattach the linkage. The 2.3 gets alot of comments...
i shaved the inside of the intake bore holes to create 1 open plenum about a inch deep under the adapter. Just Google 2.3 intake mini stocks. I...
i used the lower intake and plugged the injector holes with brass fitting. i bought a standard Vintage Speed carb adapter. I bolted it in using...
This is what i did. Hardlined to a fuel regulator then a short soft line to a hard fuel line that feeds both carbs. No fuel block needed. Works...
Yeah, i have a super slider spring. It is suppose to be nice this weekend so I'll take different combinations of leaves out. I'll try to get the...
Hey, thanks for posting my pic from my album. I haven't figured how to do that. Your's looks like a sweet ride! I don't have any steering...
I have an explorer rearend in my car. I got a explorer junkyard driveshaft and had it cut done. New u joints installed and balanced. It was $200...
Car porn, I tell ya, car porn. These pictures are the best.
Thanks for all the replies. There were originally 7 leaves in the spring. Yesterday, I took out the 2nd one (from the top) because from what i...
I have a Model A Sedan (car weighs 2300lbs - see album) with a Ford 2300 4cyl engine. Its roughly 200lbs lighter than a SBC. It takes small bumps...
Separate names with a comma.