The Jalopy Journal
I like the ray gun approach with the 3 white rings, maybe a little shorter but with a peaked red end, shaped like a 56 chev taillight maybe. Love...
I had a 32 roadster years ago, the previous owner put a louvered belly pan attached to the bottom of the chassis rail. The exhausts ran between...
That's a refreshing rear treatment, not so much the front. Now what happens with a light section of 2 inches, followed with a 3 inch chop with a...
Did you check your clutch fork and throw out bearing on the bell housing bolted to the gearbox making sure it is all centred and works properly on...
Anhydrous citric acid, used by food and winery companies, I buy it from the local farm supply company. It lasts such a long time, I don't find any...
I've been using citric over 10 years, does a great job. Item needs clean of grease and oil and underseal. Will soften primer but not paint. Will...
Have you thought about one or two, sprung loaded trunk supports out of a 46-8 Ford coupe.
Thank you as always for your constant updates, the car is looking fantastic, definitely a fresh look on custom body work. It's the first article I...
That's a nice car, if you like the car, keep it, if the seat is the main problem, get the auto trimmer to modify the springing to lower the base,...
This is a fantastic design and build as you go, it's obvious you have looked and studied many of the old designs of this era of cars and the...
What a magnificent work of art and engineering, I wish you the best of luck with your racing, looks lots of fun indeed. Sent from my VFD 710...
Love it, that screen frame and roof will make the car, great work Sent from my VFD 710 using The H.A.M.B. mobile app
My guess is the brake hoses, it's been sitting a long time, with fluid in can make the hoses spongy inside, you can force fluid through with...
I would be very cautious about dropping an engine block in citric acid, try something cast iron first as a check. I derusted some old horse drawn...
I just wipe phosphoric acid on and can stay clean for several years, it you get a little surface rust, just wipe a bit more on. When ready to...
Separate names with a comma.