The Jalopy Journal
Ok guys, putting this out there to see what offers i can get. I have what to me is a ton of money tied up and some serious life changes are...
I'm gonna be heading that direction I guess...right now I'm p'd I'm gonna have to take it back down but unless there's another solution I will be...
[ATTACH]
The quick change tilts the rear axle 5 degrees to the rear. Derek , the guy that has these made acknowledges this as he knows the radius rods...
Installing kiwi quickchange, has anyone experienced any problems with the rear spring or shackles after installing one? I've seen offset hangers...
Ok, I looked at it closer on a bigger view than my phone...First off, the shortest spring in the pack with the chamfered edges should be on top no...
Looks like you have an 8 spring roadster pack which is right. You can get it lower by taking out some of the longer springs. Looks like the long...
Ha-ha, I think I've got how to do it. Just can't decide whether I want to or not.
I knew I had seen that done before...I was thinking it was in the tardel book but I looked this morning and that wasn't it.
[ATTACH] Guys, just wanting some , what would you do input. I blew the engine in my 28 roadster so I pulled it out. I also have a v8 trans to...
The splines measure .275 and the closest keystock I can find is 1/4. does this sound familiar at all from when you guys did it? I have the same...
OK. I think I got this...turned down the shaft to fit the inside diameter of the coupler(I've already acquired that coupler from macs) then cut...
Separate names with a comma.