The Jalopy Journal
Thanks for all the good ideas and reply's! I really don't know what i'm talking about. i'm just trying to figure out whats going to happen if its...
YEP, we tried a couple different designs, but non worked vary good. we tried a bent tube to run the cable through and pull the throttle lever back...
this get confusing. but on the VW the throttle cable ( YOUR facing towards the front of the car) is to the left of the carb so with the carb...
its for my boys hot rod VW bug with it mounted in the rear its going to be backwards on acceleration. word is that it will continue to accelerate...
i'm not sure i'm in the right place to ask this. i have a particular application for a Edelbrock Performer 4 barrel carb that requires it to be...
received my 6" lowered tube axle from Speedway a couple days ago. so yesterday i went to fit it to the springs to see how the width is going to...
I had a local Sheetmetal shop bend me up a couple for my 31 chevy Jay D.
1971BB427 Were in Oregon are you. i'm in Coos Bay.
AmishMike, Thats my plan get the plates on as close as i can and tack. then put put it all together and then a final check and weld. THANKS Jay D.
YEP, its from Speedway, but it has spindles on it. a trailer wouldn't handle very good with it . Jay D.
Another question, should i have the wheels and tires on. its going to be suspension wise about an 1 1/2 lower in the front then i'm going to be a...
yes its castor i'm talking about. Jay D.
just got my Speedway 6"droped tube axle. for my 31 chevy pickup. it comes with no spring pads welded on. what i'm wondering is what degree of...
Separate names with a comma.
The Jalopy Journal