The Jalopy Journal
Going to be there Saterday afternoon. Buddy's driving his just finished '40 Pontiac coupe over from Concord.
Cooker started making the 285-70R-15 again since BFG quit making them about 4-5 years ago. Never heard of a 16 " in that size, though.
Taking the drivers quarter window wood out of my '29 coupe and found a book of matches with one match left. There from Jerry's Snack Bar,...
Thats an anti-theft tree.
Texasspeed- you hit the nail on the head. Between my half-ass spelling and rough discription, a picture tomorrow would make this alot easier.
That might work, just as long as you dont mess up the lower panel to bad. I might try an air hamer with a notched hammer bit.
Neither, just want to clean up the metal and get some primer on it
The body I have has a lot of serface rust at the interior joint of the roof to the body sides. Also on the outside of that joint(where the belt...
If you could lay the windshield back a little, it would look killer. In the side shot, the curve of the grill as it heads for the hood needs...
Brucer- how about using a valve spring mounted to give the brake jaw a little lift up and fabing an oversize wing nut on each side so you slide...
I think you are better off having the disconect switch on the positive lead. And the easier it is to get to the switch, the more you'll use it. If...
Tumbleweeds- in the side view of your car, looking at the spring eyes, it looks like you have some caster, maby not enough??
Might be an opertune time to put in about fifty louvers!!
If the split ring is as pristeen as the rims, I/E not bent or rotted away at the area where it sits in the rim , why not just use them??? If you...
Separate names with a comma.