Date codes are here- http://ddautoparts.home.mindspring.com/idtag.html I am also looking for access to the specs. I believe you are looking for Delco Remy Service Bulletins 1G-180, 1G-185, 1G-186, and 1G-187. Right?
Thanks for the Dates codes. The service bulletins help a lot also. Appreciate it rond. Anyone with the specs would be appreciated....
I located a site for date details but can't now find it again, as an example this is a GM date code which is next to ID number, eg. 1110213. Date code next to identification number, eg.2 M 28 2 - 1962 M - December 28 28<sup>th</sup> day
I can't locate anything apart from my old notes so I can restamp my generator distributor and starter motor tags. Wish I knew the damn site as I didn't bookmark it.
Man! I love period correct hotrods from my youth as much as anybody but date coding generators is too much for even me. I'm pretty sure some 54 Buick's were 12V. Maybe the Rivieras? On a similar vein, I was surprised to learn that I needed a code or number off of a Delco starter motor to get a starter bendix for a 54 Studebaker. The rebuild shop had to have that number to look it up. Amazingly they had one in a dust covered box once I got the number for them. This was about 4 years ago.
Tommy, To be honest with you, I'm really just looking for a Delco Remy generator without power steering for my chevy 283 that would look original to the motor. Would one off a Buick or even a Oldsmobile be similar ? Meaning the same length and Diameter? Anyone?...
Yes they all look the same with the step down case. If you get one from another GM make just get the voltage regulator to match the make and year. 57 Olds
You should be able to get both matching pieces at Napa. Or check with these guys. The owner is into vintage cars and has restored cars and rods. http://www.smithae.com/ They aren't the cheapest by any means but they do things right and know their stuff. Their turnaround on rebuilds is good too and they do the UPS thing regularly.
I doubt it. I've never tried to use anything that wasn't made to go together. I've always just bought the regulator for the car that the gen. came from. Why chance it? Match the gen. with the voltage regulator and there won't be any problems.
Buick, Oldsmobile, and Cadillac went 12 volt in '53. Chevrolet and Pontiac followed in '55. Assuming the generator still has its original I.D. tag, the color of it tells the voltage--black for 6V and red for 12V. If you want a bit more juice, try for a generator from a Cadillac, Buick or Olds; those cars were more likely to have options like A/C or power windows and usually had a higher amp rating.
Then hit a site like Rock Auto and look up the regulator and you'll probably find the same regulator fits a couple dozen cars. I have one here that I looked up and was used on multiple years of Studebaker and Chrysler, more than I even took the time to list out. Also, one oddity/exception to above - '53 Buick Special is 6V and straight eight, basically a carryover from '52.
just ordered regulator from rock auto,good price,will see when it gets here,its not a delco remy its a standard,(thats the brand name),,,,,
One last question... What would be the Amp rating typically on a Delco generator on a "low end" vehicle and the Amp rating on such vehicles as a Cadillac, Buick and Oldsmobile with all the goodies...
30 on most of the Chevies and as much as 55 on the Caddies. It depends on the equipment that the car came from the factory with. If you get the number off of the generator, a Motors manual will tell you the amperage and therefore which regulator to get for it to get a matching set. I never knew this info was in the Motors manual until I just looked to find the different amps available. This makes it pretty easy if you find one on the ground in a junkyard. Look the number up in the manual and order the correct VR.
I guess I lied.....another question .....with my points ignition with built in condenser , I don't need the condenser on the generator, correct?
Yes, I wondering that too. If you do I would be interested in acquiring it. I have a really nice rebuilt generator for 57 olds that I would trade for it if possible. I need to put a tach drive off the ass end of one of those to hook up my tach. Let me know.
Ok, let me preface this by openly admitting I am a total dumb-ass when it comes to electrical, and yes, this is probably a stupid question. Can you convert a 6 volt generator to 12 volts? Rewind the armature? I remember hearing this back in the sixties...