I'm getting ready to drop the 360 engine in. I would appreciate, any help. Seeing that I never did this swap before. I have a few things to my favor, which is the pan is right and I have the right driver's side exhaust. also I have a 727 out of a 75 camper. I don't know for sure how or what with the motor mounts and trans. cross member.
Tranny crossover make frame brackets & use something like 2X2 or 1X3, get a truck tranny mount & weld ears on either side of the mount to run a crossbolt through. Engine mounts; Use factory uppers & making your own lowers, shouldn't be too hard. Have you checked with Butch's cool Stuff? As has been said many times, offset the engine about 1 1/2" to the passenger side.