Heres the car..did all the work myself. Painted the car in ppg,base clear,Interior from Dearborn,Engine is Alunimum headed 351w 10.5 compresion 9in.rear with 355ring,limitd slip....Dig the site thanks for lookin.
It should bolt right if yours was 289 powered... Find out which oil pan your gonna need to fit that cross member..
Very nice! Did the 351 fit without modifying the shock towers. Nope, did a mock up wit the engine and headers. took a sharpe made a mark where the headers hit, one on each side.Took the flame cutter heated those 2 spots up.Then took a large ballpean hammer,and sruck it with a double jack.made a dent the size of a 50cent peice on one side, half that on the other. after painting...looks really clean..When u drop the clutch..u say WOW thats worth it..imo