Me and my dad go to Speedweek every year, and we love it. My dad's an old hot rodder, and he and I work on cars quite a bit. How can speedweek get any better for 2 guys that love to watch the cars go fast? Well, we could go fast. I want to build something to run on the salt next year. Neither one of us are very skilled fabricators, we don't have lots of $$, but we have a little time and some determination. We are OK at wrenching on stuff, just not big welder/fabricator guys. What would you Bonneville guru's recommend for a father/son/grandson project that could run at the salt? We don't care how fast we go, don't care what class we're in, don't want to spend lots of $, and just want to have fun. It may even turn into a charity fundraiser. Thoughts? I'd love to hear some ideas. Can a belly tanker be built for cheap? We have a sbc too, as well as a good TH350. Is it going to break our bank just to meet the safety standards? Any thoughts/ideas would be appreciated.
I think Lucky may still have one around at the Old Crow shop....he might have sold it. Depending on how fast you go, I think determines the safety stuff. I know if you are in a class that has a record of say 175, and your car only goes 120, it still must be built to the standards of 175. Best thing I could think of is to get a current rule book if you haven't already. I hate to do this, but the best advice I ever got from about a salt car was from an old fella who went all the time. He told me to wait at least 2 weeks after I got back home, before I made any plans. If after that I still wanted to build something, then he said it probably was gonna get done. He was right. I seem to lose the steam after a couple of weeks at home in the grind. Maybe your not that way.....Actually I hope you aren't and I hope you go for it!
My advice would be to build something to run in production pickup. A 50's F-100 would be a start.... the record for a flathead in a '53 f100 is like 107mph. They are cheap, and plentiful. Another... maybe even CHEAPER truck to run would be a mid 60's ford that originally came with a 289 or 302. You would then build a de-stroked version or just find an original 260cu-in SBF. With a 260... the class record is 126mph. With either one of these motors in a PP... the class record are attainable... and more importantly, the safety gear won't be THAT expensive. The safety gear... including seat might set you back 2k at the most. That's fire system, driver's suit, seat and seat belts. Sheesh, might even be able to do it cheaper if you find a driver's suit on e-bay... but, by all means, buy the fire system new. Using my estimator (judging by a guy who has done it)... you coul dbe into the total deal for around 7k... that's motor, safety gear, engine, trans... truck and all. Shit, I bet it could be done cheaper if you are resourceful... Find a buddy who does welding... or better yet, take a class and learn how to weld yourself. But as far as building a roadster and/or a belly tanker... you can take that dollar figure and multiply it by AT LEAST FIVE and you might have a rolling chassis. My guess would be... without at least 10-20k to get started, and another 20-30k to finish it up, you'd probably be looking at your $1000 belly tank mocked up on blocks for a few years before it got sold. I am basing this on the fact that you have very little fabrication skills... when I added up all of our hours on our little roadster that was spent fabricating... I came up with a bill of about $300k @ $50 an hour. Granted, our car has a lot of trick home made shit on it... but even if you HACKED it together for someone... you're looking at 50k to build a belly tank before you even get to the motor. I don't mean to be an ass hole... I just want you guys to be honest with yourselves and be out there in a year or two actually racing! If you are interested in actually following my advice... feel free to PM me and I can help you guys along the way. Sam
Oh yea... another positive with the F-100 is that all the stock suspension can be rebuilt and run as-is... no need to get fancy... just lower it, and go. Brakes? stock. Rear end? Stock... sheesh, they come with 9"ers and different ratios are a junkyard run away! Sam
In my best Glenn Beck character voice......................."well ya but I can build a $800 hotrawd!!!!!!!!!!!!!!!! ya know!?" Thanks for the reality check, it is up to each reader to read between the lines and see where their skills lie.
When I first went to Bonneville as a spectator, I had no idea what I was getting in to. It has been the experience of a life time but very expensive too. When you race a faster car it takes a lot of work, time, and money. There is the expensive of the car, getting it entered, getting the car and everything you need for the pit to the salt, and your accomodations while you are there. In general there is a lot going on that the average spectator does not know about. Some efforts are more complex than others. For instance most motorcycles require much less support than a car. I think Sam has some good thoughts. There are classes that are affordable but you need to look at the rule book closely as some easily obtained records are disappearing. John
Anything you put together for an SCTA-BNI class will not be inexpensive, regardless of class or speed. I would suggest you look at the USFRA 130MPH class. It's for street legal vehicles (car/bike) and is probably the least expensive way to put the peddle to the metal on the Salt. Heres' a link to their info: http://www.saltflats.com/I30_Club_2009.html
Sure do appreciate Sam's perspective here. Anyone offer advice on tire quality/choices, for a given class or speed? I'd hate to see one give out after a careful build to meet all the safety req.s
It's for sure that if you don't want to do much fab work, a tank is out. They are all fab. Unless you buy a turn key racer. Subscribe to the Bonneville Racing News and maybe you can find something for sale in there that will get you started.
All depends upon $$ and how fast you want to go. As Rich said the 130/150 clubs are going to be the most bang for the buck and get you on the salt with your family. If you want to go faster and have more money to spend, this is a great deal on a car less engine/trans http://www.landracing.com/forum/index.php/topic,4704.0.html think he is now asking $15k for the roller. Browse the for sale ads.
Study the rulebook/existing class records before you start ordering parts. Chances are that something with a 350 chevy in it is in a class with a fairly high record. I'm sure it would be considerably cheaper to build a car in a 120 mph class versus a 220 mph class.
Thanks SamIyam. Great input. We don't really care how fast we go, or even if we get a record for now. We just want to participate. Can't help it, it just looks so damn fun!!!
112mph with a flatty in an early Ford pickup? Probably easier to do the mid 60's F100 with the 260 then... or, maybe look to run one of the other classes with a smaller motor. But seriously guys... it ain't rocket science. Come to think if it, maybe that's why I don't think it's all that hard... our team is made up of guys who built rockets. My advice is the same as many... join the SCTA/BNI... get a rule book... and comb over it to find something you guys can build. Come up with a plan... and stick to it. Don't get in over your head with grandiose ideas about running 200mph in a belly tank or roadster. Be honest with yourself about your finances and your abilities. Build it, race it and have FUN! Sam p.s. another "hidden cost" is the HANS device that is required for all new cars... about $700... ouch. BUT, look towards borrowing one. They are specific to the type of seat you are going to run. What we did? We put our feelers out... and borrowed one. Keep me posted! Sam
Get a motorcycle. Life becomes a lot easier. A Snell 2005 or better helmet. Leathers and you're ready to run. Better still get a sidecar outfit. You don't have to hold them up while waiting in line :- )
So I found a '66 Ford F-100, fairly straight, no major body damage, w/newly rebuilt engine for $1000 obo. I'm going to go check it out.
GET a rule book and check records for varrious classes. Any Class with a recvord over 200MPH will cost a bunch of bucks for safety equipment.You have to build to current record NOT what your vehicle can go.
A guy I work with runs at Bonneville with some motorcycles. His teenage son set a record at 35mph on a Whizzer a few years back. They were planning mods to double the speed, but I haven't kept up on how they've done recently. Edit: I found this under 100cc motorcycle here http://www.scta-bni.org/Bonneville/BNI_records.htm This must be their team. 100 cc production vintage P-PV Prairie Drifters Whizzer 8/07 34.820
The new record for E/PP at Bonneville is now 128+ and you will be hard pressed to build an E/PP truck for less than $10k, I know. But it's still "relatively" cheep fun!
What does "E/PP" stand for? That's the stuff I need to learn. I know nothing about all the different classes running out there.
E = 184-260ci PP = Production pickup go to the SCTA web site and get a rule book, that is where you start. http://shop.scta-bni.org/2010-rules-and-records-book-SCTA001.htm <object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/fctwQghNPu0?fs=1&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/fctwQghNPu0?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
Sounds like a start... I was also going to mention... shooting for a slower class means fewer safety requirements which translates to few $$ being spent to get out there and race. Also, don't let the thought of having to spend big $$ to get out and get a record scare you away. Sure it might take more than 10k to build just a motor to run in Production Pickup against a 128mph record... but nothing says you can't throw a bunch of throw aways from a local roundy rounder's claimer motor (if you're totally on a shoe string) to put someting together for a fraction of the cost to go out and run 115 on a 128 record. The rush of going down the track will be worth it... Have you found a local fabricator that can weld your cage up for you? I also need to mention... on the cage... for a pickup is pretty simple. The halo bar and the main hoop (total of four bends) can be done by anyone with a 1 5/8" or 1 3/4" bender. You just need a measuring tape to tell the guy what size to bend them up to. A trained monkey can notch tubing... get the main hoop in, the halo, and then work on all the down tubes and diagonals... PM me for a better explanation... but if you buy a cheap 110 mig, you can fit and tack all the tubes in yourself and save BIG $$$ Sam
Oh yea... buy a fleet side for sure... and a long bed if you want to save $$ and possible go a tic faster... I think it might give you an edge over the competition. Sam
I have the same set up. I changed mine around recently out of boredom and removed the fenders and paint. I never thought of running my Whizzer at Bonneville. Did he sleeve the motor to run 100cc class? Stock they're 138cc.
He said something about getting a displacement break because it's a flathead. I guess a rulebook check would would be the first step. He said the salt built up between the rear tire and fender, which slowed it, but not sure if fenderless would make it "modified".