help w/ Lakes Pipes noise baffle

I'm going to put lakes pipes on this roadster I'm building but need some help/idaes on building baffles for the cones.

I'd like to keep it a few decibles below open pipes level but don't need it to be as quiet as glass packs. What have you done, how did you do it, and what actually tempers the sound?

Thanks

 

go to a chopper shop,you should be able to get then for 5 or 10 bucks a peice

 

Here a link to a tech article that I had saved.


http://www.jalopyjournal.com/forum/showthread.php?t=43062

A buddy of mine made a set for mine using the internals of a glasspack, was pretty much the same in the end as this tech article

 

I am using motorcycle baffles with some fiberglass wrapped... You could use them without the fiberglass also...

 

thanks for the link, I'm starting to get the picture

 

I used these VW stinger Baffles in my Lime Fires. Work great.

http://www2.cip1.com/ProductDetails....ode=ACC-D-2538

 

did those muffle well ^^