Register now to get rid of these ads!

Folks Of Interest 1955 Hudson Wasp(what not to use a fan belt)

Discussion in 'The Hokey Ass Message Board' started by Marty Strode, Aug 11, 2025 at 3:31 PM.

  1. Marty Strode
    Joined: Apr 28, 2011
    Posts: 9,618

    Marty Strode
    Member

    This story takes place in the Summer of 1965, in McMinnville Oregon. Just one of the foolish/dangerous things I did that Summer as a 16 year old.
    !955 Hudson Wasp.jpg
    The 1955 Hudson Wasp Story ( How not to use a fan belt)
    Mike McKinney, a friend of mine stopped by to show me his new purchase, a 10 year old, but like brand new Hudson. It was pristine in and out, and waxed to the hilt. He had something to show me at his house 2 miles away, so I rode along. When we were going to head back, it wouldn't start, and being 6 volt it turned over very slowly. Without any jumper cables, a chain or a tow rope, we needed a solution. His Dad had a 52 Olds, but we couldn't push it, because the Olds was missing the front bumper. I looked around and found a fan belt, thinking we could hook it over the rear bumper guard of the Olds, and the front guard of the Hudson, and tow it to the 18 or so mph for the Hydromatic trans to kick in, and start the engine. The problem was, with the forward angle of the Hudson guard, the belt would slide up and come off immediately, and not even move the car. It was a hot day and I didn't want to walk the 2 miles home, so we hatched a plan. I would ride on the hood of the Hudson, holding on to the ornament with my left hand and use my heels to hold the belt down, and release it when the engine started. It all went fine, I felt it come up on compression, the engine started and Mike clicked it into neutral. The problem started, when I lifted my heels off the belt and the Olds was pulling away, my shoes slipped off the bumper, and luckily I landed running. Mike was busy looking at the gauges, and was unaware I had fallen in front of the moving car. With the bumper hitting me in the calves, I sped up and dived off to the right, with Mike coasting on by, oblivious to the situation ! Just another time the Good Lord was watching over me. The car pictured is not the one, just a sample. Thanks for reading !
     
    Sharpone, 302GMC, jet996 and 11 others like this.
  2. Fitty Toomuch
    Joined: Jun 29, 2010
    Posts: 383

    Fitty Toomuch
    Member
    from WVa

    Seems as though a person is missing in this adventure? like who`s driving the Olds?:D
     
    Sharpone, hrm2k, AVater and 3 others like this.
  3. alchemy
    Joined: Sep 27, 2002
    Posts: 22,319

    alchemy
    Member

    The wasp almost stung you good!
     
    Sharpone, hrm2k, AVater and 3 others like this.
  4. Marty Strode
    Joined: Apr 28, 2011
    Posts: 9,618

    Marty Strode
    Member

    Mike's Dad !
     
    Sharpone, hrm2k, Tim and 2 others like this.
  5. Marty Strode
    Joined: Apr 28, 2011
    Posts: 9,618

    Marty Strode
    Member

    We Strodes never had much luck with Hudsons. My Brother Jerry had a pretty hot 52 Olds Hardtop, we took it to the drags and he won pretty easily. Went back 2 weeks later and there was a blue and white 53 Hornet. Turns out, it was purchased from a guy in California, named Jack Clifford ! The National Record Holder for the class !
     
    Sharpone, jet996, hrm2k and 4 others like this.
  6. 1biggun
    Joined: Nov 13, 2019
    Posts: 900

    1biggun

    Thats about as smart as strapping a aluminum lawn chair to the center of the front bumper of a IH scout with Bunji cords and trying to rope deer in the middle of night t 60 MPH like your on Mutual of Ohama Wild Kingdom . It all goes great until you actually rope the deer .

    Also towing a buddy on a big wheel with 4 belts used to hold up your pants out the back of moms 64 Ford station wagon at 45 MPH at 2 AM is not a good idea either .

    Now towing buddies on a 40 ford hood on snow and ice worked out great . That plan was a keeper .
     
  7. Marty Strode
    Joined: Apr 28, 2011
    Posts: 9,618

    Marty Strode
    Member

    We used a 53 Ford hood, it it belonged to a shiftless brother in-law of ours, we didn't like him anyway !
     
    Sharpone, jet996, hrm2k and 2 others like this.
  8. 1952henry
    Joined: Jan 8, 2006
    Posts: 1,553

    1952henry
    Member

    I think of the adventures I had as a kid. If I ever caught my daughter doing those things, I would lose my marbles.
     
    Sharpone, jet996 and AVater like this.
  9. hotrodjack33
    Joined: Aug 19, 2019
    Posts: 4,752

    hotrodjack33
    ALLIANCE MEMBER

    The 2nd date with my now wife (of 42 years) involved flat-towing my Model A with a chain about 2 miles (and through town) with her Monte Carlo to my buddies muffler shop to build the headers. She had never towed anything before but did a pretty good job...and didn't complained at all. Decided right then and there, she was a keeper.

    The Model A
    b31b.jpg

    The (now) wife and her Monte Carlo (my Ranchero in the background).
    bon4.jpg
     
    SS327, Sharpone, 50chevytx and 7 others like this.
  10. AVater
    Joined: Dec 9, 2008
    Posts: 3,401

    AVater
    ALLIANCE MEMBER
    1. Connecticut HAMB'ers

    Love the stories! I’ve often thought that the hardest part of raising my kids was remembering all the stupid things I did and worrying about them doing similar or worse.
     
  11. Marty Strode
    Joined: Apr 28, 2011
    Posts: 9,618

    Marty Strode
    Member

    I learned a better way with a chain, stick it in a piece of pipe, an old farmer's trick.
     
    Sharpone and hrm2k like this.
  12. hrm2k
    Joined: Oct 2, 2007
    Posts: 5,376

    hrm2k
    ALLIANCE MEMBER

    At 16, my first night out in my dad's 54 Ford, a friend who was with me convinced me to remove the crossover pipe on the 239 Y block. The crossover pipe went across the top of the engine. Open exhaust sounded great. When I went to put the crossover pipe back, I found the 2 very nice burned spots on the hood. My father had no sense of humor
     
  13. In regards to hotrodjack33's towing story, this didn't happen to me but I did see it happen. Was sitting at a stoplight and saw a 48 or so Chevy pickup being towed with a chain behind a car. The car and truck were sitting at the stoplight across from me, waiting to make a right turn. When it was clear to go, the driver of the car, I'm assuming his wife, took off like a bat out of hell, the chain had some slack in it, when the slack left the chain, it tightened up and ripped the front bumper off the truck. The assumed wife continued for a ways before stopping. She got out, he got out of the truck, arms flailing, mouth going. I sat through the green light just watching. This was a very long time ago in San Leandro CA. Another time a neighbor had a stock 36 Plymouth sedan. Pretty nice original car. The motor was stuck. He asked me if I would get in the 36 Plymouth while he pushed me bumper to bumper with his car, I think his car was a 56 Chevy. I was 16, the only other one there with a driver's license. I said yes. He told me he would push me up to around 35 MPH, blow the horn, and I was supposed to let the clutch out. The 36 Plymouth was in 2nd gear. This was in a residential housing track in San Lorenzo CA. He's pushing me down the street, gets up to speed, blows the horn, I sidestep the clutch. The old Plymouth locked up the rear tires, and he ran into the back of me. Made a hell of a noise, between the tires squealing, the crashing sound of the two cars hitting each other, it brought people out of their houses to see who just crashed. I think the neighbor needed a change of shorts after that. I was young and dumb, and really didn't think much of it. The surprising thing is that there was no damage to either car. We didn't get the motor unstuck that day.
     
    AVater, Sharpone and hotrodjack33 like this.
  14. patsurf
    Joined: Jan 18, 2018
    Posts: 2,216

    patsurf

    :eek::eek::eek::eek::eek::D:D
     
    Sharpone likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.