There are generally 2 options for dealing with the big gaping hole in the top of the early cars and that's installing a original styled top insert or welding in a piece of sheet metal. Personally, I prefer to use the original style look of what came from the factory. Which way do you prefer to fill the top? HRP
I have a top off a 59 chev hardtop. I cut the chev lid to fit the existing opening. I plan on covering with Naugahyde and using existing hydem strip to appear to be stockish.
I prefer it unfilled and showing the wood the way i did my coupe. Cover with snaps so i can remove in the summer if i want.
I don't care, it just depends on the car. I've seen almost identical looking cars, 1 with a filled roof and an original style and I can go either way. Just depends on the owners preference I guess....
Bought a deuce tudor earlier this year with a ribbed wagon insert welded in. First thing we did was cut the insert out and prepare the top for Walden insert cut to size, covered with Mercedes top material and bolted to the wood. I did this on my deuce delivery and 3 window and liked the clean look so am doing it again.
I like them both, as long as the filled roof is smooth and well done. I've seen some bad examples of both, as well.
I filled mine....Hated leaky roofs....But i left all the structure if someone ever wants to remove the metal panel....
I have both. I drive the U.F.O. in all kinds of weather, so I went with a filled roof. I used a metal roof from a 70 Plymouth. The others don't get driven in bad weather, so I went soft tops. I used Mercedes Benz convertible top cloth on my delivery, and the 31 A sedan. Ron........
On my 36 Tudor, I welded in a roof section from a mid 70s VW bus inside of the stock channel, and then glued thin closed cell vinyl top foam and installed an original style vinyl insert with original rubber trim via Lebarron Bonney. Looked stock but a tad safer, plus I think it made the body more rigid. Mitch As a side note, my buddy filled the roof of his 36 sedan with a cockomaimmy sunroof abortion from some OT japanize car. He likes it but I think he really F’d it up!!
My old beater still sports the original top, it's starting to show it's age but I keep it clean and use a quality top dressing. HRP
I filled the hole with thin plywood as others have shared. Plan to cover with cloth to keep the original appearance. Would love to do what krylon did with the Walden insert but that is a bit beyond my abilities. Sent from my iPhone using H.A.M.B.
Like Mitch, tacked in a 68 Chevy roof section inside the beaded line. Covered with 1/8" closed cell foam then repro decking material, both glued down. Followed with repro aluminum trim around the edge. The trim was a real pain getting the curves but ended up nice. Biggest beef was the repro top decking material, real cheap.
I put a 32-style header panel in my coupe with the plan to either run an insert that was upholstered, stock looking, or polished. Right now, I'm leaning toward polished.
I've done them both ways. I think a metal insert is easier, and cheaper. I've kicked around the idea of a piece of aluminum, 1/4" thick, upholstered, with holes around the edge, drilled and tapped, so you could fasten it from the inside.
Can you drive in the rain without getting wet? I like the idea of the top being removable but want to drive in all weather. I'm on the fence about original or filled but your top intrigues me.
lol ... yes if I drive my OT pickup truck! But really ...there are so many places for water to invade on a hoodless old car to me it seems futile to give it too much thought. God knows there are a shitload of roadsters with fabric tops on the road. I went down the same route as @Fitnessguy as I wanted the option of removing the top when the urge hit me and I like the versatility.
For you guys that drive yours in the rain. I am reminded of a comment I have heard many times , for many years. If Henry Ford would of built boats , we all would drown .
I don't have a photo but my pal Rene' used a piece of stainless steel in his 1932 PB Plymouth coupe, It really looked good back in the 70's. Funny story, we were at Gatlinburg, Tennessee attending the Outlaw rod run and he invited Brenda & I to ride in the rumble seat to go to dinner with he and his wife the weather was cool but not terribly cold and we were dressed for the short ride, we just arrived at the restaurant and it had just started to rain, we got out and Rene' closed the rumble seat to try and keep the seat dry. Fortunately the rain came and went while we were eating and we left the restaurant to see stars twinkling, Rene' handed me a towel to wipe the small amount of water off the rumple seat, we climbed in and Rene' pulled out of the parking lot we were deluged with the water it seems the stainless steel insert had a slight dip and the water has ponded, with the temperatures being in the 40's the water was nothing if no exhilarating and the short ride back to the motel was miserable to say the least. HRP
I must be the exception to the leaky top rule on all my 32's but I can't thinl of a single one where the windshield didn't leak. HRP
Right you are Danny. It's not just us with the real steel cars, I have heard guys complain about their high tech glass cars leaking.
My 5 window has an original style top with lots of sealer while the sedan I'm building has a Walden insert installed by Traditional MetalCraft, also to be well sealed.