Thanks guys Patch welded up . Also stepped the quarter on the rocker like ford did instead of just lapping it Quarter was cracked Getting the door gapped Getting there Tighten up a little more and the gapping is gonna be done Sent from my iPhone using The H.A.M.B. mobile app
Luckily a nice original to copy from Before all the tweaking Pretty happy now Uhhhohhh Sent from my iPhone using The H.A.M.B. mobile app
If you are talking about where I cut the back panel out no way . I would rather spot weld the panel in like stock then have 3 feet of weld with no access to hammer it. Sent from my iPhone using The H.A.M.B. mobile app
Rust encapsulator while it’s all apart Brookville panel fits real nice Sent from my iPhone using The H.A.M.B. mobile app
Welded but some rust showed it’s facewhere the panels are doubled Same over here thin rusty and mig welds all over inner was cracked Only so much you can do with the double panels Got the damage out time for a new lower edge Sent from my iPhone using The H.A.M.B. mobile app
Do you have any guesses as to the history of this car, based on the amount of damage on the body? Think it was an old dirt track car or something?
I don’t think because the doors matched the paint on everything else and the doors were really nice . Also gonna guess they would have ditched some wood . Sent from my iPhone using The H.A.M.B. mobile app
Maybe you have stated this earlier in the thread, but don't recall; are you finally building a 3w for yourself? Or is this for a customer?
Making gaps a tad nicer Riveted stippled braces in for the rumble seat hungers Sent from my iPhone using The H.A.M.B. mobile app
Thankfully docs car is here as a great template !! On the bad panel . You can see the wrinkles where it is bad Template on the newly shaped panel ... no wrinkles Sent from my iPhone using The H.A.M.B. mobile app
Used it on both side to pull the cowl down because the feet on the inside of the cowl were missing . Sent from my iPhone using The H.A.M.B. mobile app
Closing in on it Now to put a step in the rocker and work the cowl into the rocker . Sent from my iPhone using The H.A.M.B. mobile app