Well I never ha e enough time to work on my own stuff but finally have enough parts to start building . 36 lb flathead /zephyr trans /full fendered heavy chop/ my folding stanchions. Full top and side curtains . Had this from a previous job . Put a new firewall in I got at Hershey last year . Patch panels I put in 4 or 5 years ago Hopefully find some doors at Hershey Fenders and hood top I got at a local sale a few blocks away I want the car to be a daily driver for around town use . Flathead will be mostly stock . Sent from my iPhone using The H.A.M.B. mobile app
A fella in Bullverde Texas posted pictures of shop made doors. They looked perfect. It was a few years ago but its here on the HAMB
Ok. I gotta ask because nobody has! What is with all the Tom Toms on the walkthrough door? You do amazing work, a true craftsman!
You have new tops for your cowl posts. Are they something you made or are they purchased? Great work.
I have a Brookville piece I'll cut the top off then most likely make the other side unless I find a real crappy pillar at Hershey . Thanks guys ! Sent from my iPhone using The H.A.M.B. mobile app
No the are perfect . But if I have a bead break to fix you replace the wire that's cracked then replace some of the bead as well . Sent from my iPhone using The H.A.M.B. mobile app
Got a 28/9 winter front for the roadster ! A winter front for a roadster? The motor can warm up but how about you? You gonna put a heater in the car for you?
eBay seller "crazyleeroy" sells replacement cowl post tops/windshield post mounts. No personal experience with them, but they look to be well done. Might be an alternative to cutting up an (expensive) Brookville cowl post. http://www.ebay.com/itm/232509079487
I already have those they don't fit well . I bought a whole cowl as well at Hershey . Sent from my iPhone using The H.A.M.B. mobile app
I too have a set of those bought a couple years ago. mine don't have the bar and round bungs on the back side, just a couple square nut's tacked on. made out of very thin sheet metal and fit like a saddle on a sow. another 100 dollar piece in the junk pile.
Thanks guys . One pillar off the cowl I got at Hershey Started messing with the dash will have to make a Pullmax die to reshape the dash rail Sent from my iPhone using The H.A.M.B. mobile app
Full fendered? Dang, I just got motivated and the wife and I decided to ditch the fenders. Between this and Ryan's & Rex's tub, I may need to reconsider my '28 roadster with fenders. LOL!
Mainly because I don't want any hassles from the cops as I plan to drive daily . Sent from my iPhone using The H.A.M.B. mobile app
Other pillar from the parts cowl on . Can't complain as its rust free and uncut Sent from my iPhone using The H.A.M.B. mobile app