Ya I hope it's not the flatty for the chevy myself. It's going to love you for putting the right heart back in her. Nice car and motor. You could probly sell that chevy motor to @3windowlarry. Lol
There will always be debate as to whether they rule or not, but there is no debate on there longevity. There are certainly more 24 stud flatheads running around then there are GenI SBCs. Flatheads are Forever.
So yesterday another Hobby Member car left the shop. 57 Ford retractable. Took up two Hot Rod spaces. Today I started to move some stuff around. Still have three more to finish before I can get back to my Roadster. I was sweeping the floor and turned around and thought this would be a good pic. Four Flatmotors, got to love it. Then I turned around and said wow, there's more. Went to wash my hands and found another one hiding in the corner. Can't wait to get back playing with the fun stuff.
First flathead for me and is now between the rails. C69A block with C59A heads, original Edelbrock regular intake, barn find 97`s and a few mods to help it move the pickup.
Here's my 21 Stud I threw in to race last year. I have some evans Script heads for it now but I think the plan is to yank the motor entirely and build a 284" Stroker.
Sometimes it is a love/hate relationship with a flatty. I once had a flathead powered jail bar pickup. There were just days that I loved to hate the flatty in that old truck. This one is actually one of my favorites. it was just a daily driver.
I have only gotten to be around for one Flathead startup..............this one !!!!! Yes, you do know the car
Not pretty! This is what they looked like in the early '50s. When they were used hard and put away wet. (this picture is last week, not 1952)
This is mine, Canadian Heads, Tall Edelbrock, 97s Sent from my SM-N920P using The H.A.M.B. mobile app
Still rule ,well yes in a way,I do like them a lot now an even own one with 2x2s etc. in yet another rod I'm building. But back in the mid 1950 ,as I was taking in the hotrod n custom car things going on,forming up my likes an dislikes. The thinking was v8 flatheads were the old junk an over the hill. Over head valve V8 was the in thing,Cady,Olds,or Hami,even Studebaker an Ford Ys. So OHV V8s ruled for about a decade plus,nearly no rods were built with flat set ups. Much later all but just a very few super hard core V8 Flatheaders then were joined by some that did start to like the older stuff. Point being there was a gap,we could say were they did not rule much at all. I do love my flathead now for this new project 1917Hubba,yet my old rod 28A I built in 1959 still has my OHV Ford V8 "Y" in it,with no idea of ever changing it.
The crazy thing is when I bought these clamps, there was a 2 foot box full of these and several other box full of different sizes, but my friends were in a hurry to walk away from the booth that I bought these and several other sizes. Now I collect Wittek clamps.
59AB in my Model A tudor. Fenton intake, headers, rings and bearings. Runs good, drive it most every day if it's not raining when I leave for work, don't care about the ride home. Cliff Ramsdell
Just a simple little 276 going together for my AV8 project. Merc Crank Offy heads and intake 3 5/16 pistons Potvin 3/8 cam Hopefully heading for machine work soon. --louis
Hey Ron, I don't know a lot about anything, but yes this is my car. The guy who put the frame together, ( It's a '32 frame), a good buddy of mine, told me it was an F-100. It has been there for 13 years! It doesn't look like the Model A Boxes I have had! There is no light horn attachment at the end of the box. Regards, Tony
on an f100 box the steering shaft is on top of the sector,f1 has the steering below the sector,makes more room at the corner of the head. The one in my coupe is modified at the mounting flange,but goes through the stock model a hole in the frame. Sent from my iPad using The H.A.M.B. mobile app
Ron and Bader2 Thanks for the input. Here are pictures of mine. This box whatever it is fits in the original '32 frame holes. Lets not hyjack this thread. Respectfully, Tony