Hot Rods vallley crankcase breather 61 sbc

If I remove the crankcase breather in the valley, what would I do to replace it. It is too big in diameter and hits the manifold I want to use.

 

put a freeze plug in it and vent it thru the valve covers .

 

Yeeeeep. Easy as pie. ^^^^^^^^

 

I have two vented caps in one of my valve covers, is that good, or do I need one in each. Thanks.

 

Be better to have one on each side.

 

I run two caps in my drivers valve cover and my PCV in the pass cover.

When I was a kid it was popular to run one in each cover but that was when many used a crankcase breather pipe still.

 

Vent one valve cover and put a PVC valve in the other. Or rig the PVC valve in the freeze plug.