Register now to get rid of these ads!
  1. NEW JALOPY JOURNAL & H.A.M.B. MERCH!
    Hey fellas, we've just re-stocked the store with a couple of great new t-shirts, an incredible jersey, and just about the best damned ball cap ever made. Put it all in your wardrobe and you'll be the sharpest dressed man in the pits - that's a promise!

    Anyway, to check it all out just CLICK HERE!

    (To get rid of this notification, just click the little grey 'x' located in the top right hand corner of this notification box.)

Hot Rods 58 GMC/Chevy fleetside tonneau cover???

Discussion in 'The Hokey Ass Message Board' started by harleycontracter, Feb 18, 2014.

  1. harleycontracter
    Joined: Aug 25, 2007
    Posts: 1,302

    harleycontracter
    ALLIANCE MEMBER

    Does anyone make a tonneau cover for a 58 fleetside bed. OR anyone know what other cover would work. Might park my truck outside and I don't want it filling up with crap.

    Thanks
     
  2. FenixSpeedShop
    Joined: Mar 19, 2013
    Posts: 203

    FenixSpeedShop
    Member

    Does Gaylord's still make these?


    Posted using the Full Custom H.A.M.B. App!
     
  3. harleycontracter
    Joined: Aug 25, 2007
    Posts: 1,302

    harleycontracter
    ALLIANCE MEMBER

    They can custom make a fiberglass one . Not looking for fiberglass. Besides way too much $$$$$ Thanks though.
     
  4. texasred
    Joined: Dec 3, 2008
    Posts: 691

    texasred
    ALLIANCE MEMBER
    from Houston

    Fairly simple to make your own from 1/4 inch lexan or 1/2 inch ply wood 1x1/2 inch alum.angle
     
    Register now to get rid of these ads!

  5. harleycontracter
    Joined: Aug 25, 2007
    Posts: 1,302

    harleycontracter
    ALLIANCE MEMBER

    No Looking for a vinyl one that snaps to a frame and not the bed
     
  6. FenixSpeedShop
    Joined: Mar 19, 2013
    Posts: 203

    FenixSpeedShop
    Member

    Any current offerings match your bed dimensions or close?


    Posted using the Full Custom H.A.M.B. App!
     
  7. harleycontracter
    Joined: Aug 25, 2007
    Posts: 1,302

    harleycontracter
    ALLIANCE MEMBER

    I'll have to measure and try to figure it out
     
  8. TagMan
    Joined: Dec 12, 2002
    Posts: 4,594

    TagMan
    ALLIANCE MEMBER

    Here's a couple of pics of the vinyl one I had made for my '63. Nobody that I could find made one for that vintage short wide, so I went to a local upholstery shop and he took the measurements and called a company in Syracuse, NY (as I remember) that makes the covers. I received it in a couple of weeks and it fit great. Cost about $390.00 with tax & shipping, which was about $50.00 more than a stock cover.

    If you want any details, PM me and I'll look them up for you.

    [​IMG]

    [​IMG]
     
  9. FenixSpeedShop
    Joined: Mar 19, 2013
    Posts: 203

    FenixSpeedShop
    Member

    That's a good looking cover TagMan


    Posted using the Full Custom H.A.M.B. App!
     
  10. harleycontracter
    Joined: Aug 25, 2007
    Posts: 1,302

    harleycontracter
    ALLIANCE MEMBER

    TagMan got your PM I'm on it tomorrow. Thank you
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2013 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.